SAC-10 Plus 10 m method semi-anechoic chamber-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

SAC-10 Plus 10 m method semi-anechoic chamber

Brand:

FRANKONIA

SAC-10 Plus 10 m method semi-anechoic chamber

Product Description
Main features
Technical parameters

- Commodity name: SAC-10 Plus 10 m method semi-anechoic chamber
- Commodity ID: 1064665746224336896
- 品牌11: FRANKONIA
- 行业: 军品,民用,汽车电子和整车
- 描述: SAC-10 Plus anechoic chamber is a state-of-the-art EMC test solution with a single test axis in a quiet zone of ø3m or ø4m at a measurement distance of 10m, 5m and 3m.
- 品牌: FRANKONIA
　　SAC-10 Plus anechoic chamber is a state-of-the-art EMC test solution with a single test axis in a quiet zone of ø3m or ø4m at a measurement distance of 10m, 5m and 3m. The innovative polygonal shape with its optimized absorber layout is a space-saving, cost-saving and efficient solution. The planning of the anechoic chamber must be carried out as early as possible, for example, at the same time as the external building of the anechoic chamber, so that the interface between them can be determined in time, so as to avoid later modification. Typical interfaces include the following: various supply paths, space reserved for the turntable/hub on the concrete floor, movement tunnels for sliding doors, and possible joints between the shielded room and the building. Furthermore, possible interfaces and emergency control/alarm systems, such as fire alarm and fire suppression systems, must also be taken into account. But when using our completely non-combustible wedge absorbers (using thin-film technology, fire class A2), it is usually possible to forget about installing these systems. SAC-10 Plus is Frankonia's most compact 10-meter half-spot anechoic chamber, which can meet the requirements of CISPR 16-1-4 and ANSI C63.4 test sites.
main feature:

　　The polygonal design and single test axis scheme fully meet the test distance of 10m, and the quiet zone QZ can be Φ3m or Φ4m

　　Fully meet CISPR 16-1-4 EMI and ANSI C63.4 (ETSI upgrade version) standards

　　Fully complies with IEC/EN 61000-4-3 EMS standard

　　The absorbing material laid on the ground can be stored in a chamber for easy use

　　More than 90% of the chamber's own products, global factories adopt unified process and quality control

　　The chamber project is fully controlled in Germany, with rigorous craftsmanship and construction specifications

　　The consistency of the absorbing material is excellent, and the simulation results have real guiding significance for the design

　　Prefabricated modular ferrite mounting technology saves installation time and provides consistent workmanship

　　Unique nano-material absorbing material, replacing traditional carbon powder technology

　　The absorbing material has excellent performance and good stability, and there is no problem of aging and sagging. If the performance drops within 10 years, the absorbing material will be replaced free of charge.

　　The absorbing material is completely non-combustible, the only one in the world that meets the requirements of DIN4102 A2 fire protection level, and avoids the occurrence of fire incidents in chambers

　　The chamber meets the cleanliness requirements, ISO 14644-1 class 5, and the materials are non-toxic

　　The absorbing material is moisture-proof, and there is no requirement for the humidity of the use environment, and it can be directly maintained with a vacuum cleaner

　　The absorbing materials can be replaced with each other, and the maintenance cost is extremely low

　　The newly designed three-knife and three-reed screen door has better performance and convenient maintenance

　　turnkey solution

Specific indicators:

model	BAG- 10 Plus	BAG- 10 Plus Triton
Dimensions (length x width x height) mm	19,205x12,080x8,325	19,205x12,080x8,325
Frequency Range	9KHz/30MHz-18GHz (40GH optional)
Test distance	3m&5m&10m
Quiet zone QZ (10m distance)	ø3m	ø3m
test shaft	single test axis	Test axis 1: 10m, 5m, 3m-EMI Test axis 2: 3m-EMI&EMS Test axis 3: 3m-EMI
Absorbing material laying
Walls and Ceilings	Wall: Lay F006 ferrite, H1000 and H600 wedge Ceiling: P2400 long wedge and mixed absorbing material
floor	Equipped with movable absorbing materials that meet the requirements of IEC/EN 61000-4-3 radiated immunity test and the voltage standing wave ratio of the radiated emission test site greater than 1GHz
Radiated emission test	Fully compliant with CISPR 16-2-3 and CISPR 22 requirements
Radiated immunity test	Fully compliant with IEC/EN 61000-4-3 standard
NSA Maximum Deviation	±3.5dB（30MHz-1GHz）
VSWR	5.5dB（1GHz-18GHz）
Uniformity	1.5mx 1.5m (75% of 16 test points meet 0dB/+6dB, 26/80MHz-18GHz)
Standard configuration
One access door, 1,238mm x 2,118mm, 1 sliding door
12 to 16 honeycomb waveguide windows for ventilation
A 250V, 2x16A AC power filter
A 440V, 50/60Hz, 4 x 64A AC mains filter
two wall panels
Feedthrough components: N-type connector, BNC connector, fiber optic interface
Distribution installation
lighting device
reflective ground
Elevated floor
Absorbing material laying
1 turntable with a diameter of 3m (load-bearing up to 5 tons, special turntables can be customized)
1 antenna tower
1 antenna tower and turntable controller
Optional
Three-phase power filter
Signal Line/Data Line Filter
Air Conditioning System
Antenna bracket
Audio and video surveillance system
Other accessories