SAC-3 Plus 3m method semi-electric Chamber-arch-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

SAC-3 Plus 3m method semi-electric Chamber-arch

Brand:

FRANKONIA

SAC-3 Plus 3m method semi-electric Chamber-arch

Product Description
Main features
Technical parameters

- Commodity name: SAC-3 Plus 3m method semi-electric Chamber-arch
- Commodity ID: 1064660887668412416
- 品牌11: FRANKONIA
- 行业: 军品,民用,汽车电子和整车
- 描述: SAC-3 Plus is a semi-electric darkroom designed exactly according to the 3-meter test distance.
- 品牌: FRANKONIA
SAC-3 Plus is a semi-wave chamber designed exactly according to the 3m test distance. The innovative dome design and the optimized layout of absorbing materials, as well as the laying of ferrite and partly composite absorbing materials with frequency range from 26MHz to 18GHz can minimize the reflection inside the chamber. Due to the relatively short length of the built-in composite absorbing material, the size of this chamber is smaller than that of the chamber with built-in long-tip split absorbing material. the SAC-3 Plus has superior normalized field attenuation characteristics (±3.5 dB) from 30 MHz to 1 GHz, and the field voltage standing wave ratio (5.5 dB) from 1 GHz to 18 GHz meets the CISPR 16-1 -4 requirements. The standard configuration of this chamber includes 1-4m scanning height antenna towers, turntables, and their controllers.

Since the introduction of SAC-3 Plus, thanks to the innovative design concept, customizability and superior performance to show an efficient and economical solution to fully meet customer needs, has been widely used by foreign customers.
main feature:

The economical and high-performance solution fully meets the test distance of 3m, and the quiet zone QZ can reach Φ1.2m to Φ2m

Fully meet CISPR 16-1-4 EMI and ANSI C63.4 (ETSI upgrade version) standards

Fully complies with IEC/EN 61000-4-3 EMS standard

Innovative dome design, with better RF characteristics, can save space, for example, to facilitate the installation of ventilation ducts

The absorbing material laid on the ground can be stored in a chamber for easy use

Upgradeable for E-Drive (Equipment Load, BlueBox, Battery Powered System)

More than 90% of the chamber's own products, global factories adopt unified process and quality control

The chamber project is fully controlled in Germany, with rigorous craftsmanship and construction specifications

The consistency of the absorbing material is excellent, and the simulation results have real guiding significance for the design

Prefabricated modular ferrite mounting technology saves installation time and provides consistent workmanship

Unique nano-material absorbing material, replacing traditional carbon powder technology

The absorbing material has excellent performance and good stability, and there is no problem of aging and sagging. If the performance drops within 10 years, the absorbing material will be replaced free of charge.

The absorbing material is completely non-combustible, and it is the only absorbing material in the world that meets the requirements of DIN4102 A2 fire protection level, avoiding fire incidents in chambers that may be caused by heat generation

The chamber meets the cleanliness requirements, ISO 14644-1 class 5, and the materials are non-toxic

The absorbing material is moisture-proof, and there is no requirement for the humidity of the use environment, and it can be directly maintained with a vacuum cleaner

The absorbing materials can be replaced with each other, the maintenance cost is extremely low, and the number of shielding body and absorbing materials can be reduced

The newly designed three-knife and three-reed screen door has better performance and convenient maintenance

turnkey solution

Specific indicators:

model	SAC-3 Plus S	SAC-3 Plus M	SAC-3 Plus L	SAC-3 Plus
Dimensions mm length x width x height	8,480x6,530x6,000	8,780x6,530x6,000	9,230x6,530x6,000	9,680x6,530x6,000
Frequency Range	9KHz/26MHz-18GHz (40GH optional)
Test distance	3m
Quiet zone QZ (3m distance)	Ø1.2m	Ø1.5m	Ø2m	Ø2m
Absorbing material laying
Walls and Ceilings	The interior is fully paved with F006 type ferrite absorbing materials, and partially laid with H600 and H1000 type composite absorbing materials
floor	9㎡ P600 removable wedge absorber is used for radiation immunity test; when the frequency is >1GHz, 14.2㎡ P450 removable wedge absorber is used for radiation emission test
Radiated emission test	Fully complies with EN 55022 and CISPR 22 Class B requirements (30MHz~1GHz); fully complies with CISPR 16-2-3 requirements (1GHz-18GHz)
Radiated immunity test	Fully compliant with IEC/EN 61000-4-3 standard
NSA Maximum Deviation	±3.5dB (30MHz~1GHz)
VSWR	5.5dB (1GHz~18GHz)
Uniformity	1.5mx 1.5m (75% of the 16 measurement points meet 0dB/+6dB, 26/80MHz~18GHz)
Standard configuration
One access door, 1,238mm x 2,118mm
Four to six honeycomb waveguide windows for ventilation
A 250V, 2x16A AC power filter
two wall panels
Feedthrough components: six N-type connectors, six BNC connectors, two fiber optic interfaces
Distribution installation
lighting device
reflective ground
Elevated floor
Absorbing material laying
Turntable (load-bearing up to 5 tons, special turntable can be customized)
antenna tower
Antenna Tower and Turntable Controllers
Optional
Three-phase power filter
Signal Line/Data Line Filter
Air Conditioning System
Antenna bracket
Audio and video surveillance system
Totally non-combustible absorbing material
Other accessories