Home page

CS102(25Hz ~ 50kHz ground wire conduction sensitivity)

1. Introduction to the test

　　CS102 (25Hz~50kHz ground wire conduction sensitivity) is suitable for equipment and subsystems on surface ships and submarines that are sensitive to low-frequency interference signals and have ground wires. When specified by the purchaser, this item is also applicable to equipment and subsystems that work on other platforms and have ground wires.

2. System connection diagram

3. Typical configuration

CS102 (25Hz~50kHz ground conduction sensitivity)
serial number	product	illustrate	brand
1	MTS-800	Magnetic field measurement system host, including, signal source: DC/ 10Hz~250kHz, power amplifier: DC-1MHz; output voltage: 50V eff, output current: 16A, maximum output power: 800 W; receiver: 10Hz-250kHz, including host and CE101/RE101/CS101/RS101 test software	Frankonia/Germany
2	CT_50AC	Coupling transformer, frequency range 15Hz~250kHz, maximum primary current 15A, secondary current 50A, including 100W 0.5 ohm precision resistor, CS101	Frankonia/Germany
3	IT-16	Isolation transformer-CS101, power: 3680VA, primary voltage: 230V, secondary voltage: 230V, secondary current: 16A, common mode/differential mode attenuation (15Hz ~150kHz): 60dB, isolation: >1kV (50Hz/ 60Hz)	Frankonia/Germany
4	NNBL 8226	V-LISN that meets the requirements of military standard GJB151A/152A, 9kHz~100 MHz, single line 70(100)A	Schwarzbeck/Germany
5	EMS-TAB	EMS test environment, including solid wood test table, horizontal coupling board, insulation support, etc.	Century Huize/China

Century Wisdom (Suzhou) Testing Technology Co., Ltd

www.300.cn nanjing SEO

Business License

全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册