Ultra-small compact Chambe-UCC-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

Ultra-small compact Chambe-UCC

Brand:

FRANKONIA

Product Description
Main features
Technical parameters

- Commodity name: Ultra-small compact Chambe-UCC
- Commodity ID: 1064701841821552640
- 品牌11: FRANKONIA
- 行业: 军品,民用,汽车电子和整车
- 描述: As an alternative to the GTEM cell, UCC can be used for pre-certification testing and research and development.
- 品牌: FRANKONIA
　　UCC, as an alternative product of GTEM cell, can be used in the pre-certification pre-test and scientific research and development fields. The walls and ceiling of the chamber are completely covered with ferrite, and 6㎡ of composite absorbing material is installed on the back wall near the EUT to ensure that the test frequency range of the chamber can range from 30MHz to 18GHz. The main advantages of ultra-compact chambers compared to GTEM chambers are that testers can walk in them, that test arrangements can have cables feeding peripherals, and that larger samples can be tested. UCC can perform radiated emission and radiated immunity pre-tests on equipment at a test distance of 1 meter in accordance with the requirements of the IEC/EN 61000-4-3 standard. In addition, it is also suitable for pre-testing automotive components according to DIN/ISO 11452-2 and EN 55025 (CISPR 25). If necessary, the UCC can also be used as a standard shielded room for conduction testing. Due to its small external dimensions, it can be placed in a normal-sized laboratory or office.
main feature:

　　More than 90% of the chamber's own products, global factories adopt unified process and quality control

　　Manufacturers who can truly lead the development of chamber technology continue to introduce new products

　　The chamber project is fully controlled in Germany, with rigorous craftsmanship and construction specifications

　　The consistency of the absorbing material is excellent, and the simulation results have real guiding significance for the design

　　Prefabricated modular ferrite mounting technology saves installation time and provides consistent workmanship

　　Unique nano-material absorbing material, replacing traditional carbon powder technology

　　The absorbing material has excellent performance and good stability, and there is no problem of aging and sagging. If the performance drops within 10 years, the absorbing material will be replaced free of charge.

　　The absorbing material is completely non-combustible, and it is the only absorbing material in the world that meets the requirements of DIN4102 A2 fire protection level, avoiding fire incidents in chambers that may be caused by heat generation

　　The chamber meets the cleanliness requirements, ISO 14644-1 class 5, and the materials are non-toxic

　　The absorbing material is moisture-proof, and there is no requirement for the humidity of the use environment, and it can be directly maintained with a vacuum cleaner

　　The absorbing materials can be replaced with each other, and the maintenance cost is extremely low

　　The newly designed three-knife and three-reed screen door has better performance and convenient maintenance

Technical Parameters:

Dimensions (length X width X height)	4,280mm x 3,080mm x 2,550mm
Frequency Range	30MHz ~ 18GHz ( optional up to 40GHz)
Test distance	1 meter
Absorbing material laying
Walls and Ceilings	F006 type ferrite absorbing material
Adjacent to the rear wall of the EUT	6m ² HF300 type composite absorbing material
floor	^2m2 ferrite absorbing material between EUT and antenna
Radiated emission test	G
Radiated immunity test	1 meter radiated immunity certification test per IEC/EN 61000-4-3
Field uniformity area dimensions according to IEC/EN 61000-4-3	0.5mx 0.5m
maximum deviation	Four measurement points 100% comply with 0dB/+6dB