Home page

CS101(25Hz ~ 150kHz power line conduction sensitivity)

1. Introduction to the test

　　CS101 (25Hz~150kHz power line conduction susceptibility) is applicable to AC input power lines (each phase current is not higher than 100A) and DC input power lines of equipment and subsystems, but does not include return lines. For AC power lines, the test frequency range is from the second harmonic of the EUT power frequency to 150kHz; for DC power lines, the test frequency range is 25Hz~150kHz.

2. System connection diagram

3. Typical configuration

CS101 (25Hz~150kHz power line conduction sensitivity)
serial number	product	illustrate	brand
1	MTS-800	Magnetic field measurement system host, including, signal source: DC/ 10Hz~250kHz, power amplifier: DC-1MHz; output voltage: 50V eff, output current: 16A, maximum output power: 800 W; receiver: 10Hz~250kHz, including host and CE101/RE101/CS101/RS101 test software	Frankonia/Germany
2	CT_50AC	Coupling transformer, frequency range 15Hz~250kHz, maximum primary current 15A, secondary current 50A, including 100W 0.5 ohm precision resistor, CS101	Frankonia/Germany
3	6512-106R	10uF capacitor, CS101	SOLAR/ United States
4	IT-16	Isolation transformer-CS101, power: 3680VA, primary voltage: 230V, secondary voltage: 230V, secondary current: 16A, common mode/differential mode attenuation (15Hz ~150kHz): 60dB, isolation: >1kV (50Hz/ 60Hz)	Frankonia/Germany
5	NNBL 8226	V-LISN that meets the requirements of military standard GJB151A/152A, 9kHz~100 MHz, single line 70(100)A	Schwarzbeck/Germany
6	EMS-TAB	EMS test environment, including solid wood test table, horizontal coupling board, insulation support, etc.	Century Huize/China

Century Wisdom (Suzhou) Testing Technology Co., Ltd

www.300.cn nanjing SEO

Business License

全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册