CWS 500N3 low frequency simulator, 10 Hz-250 kHz-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

CWS 500N3 low frequency simulator, 10 Hz-250 kHz

Brand:

EM TEST

CWS 500N3 low frequency simulator, 10 Hz-250 kHz

Product Description
Main features
Technical parameters

- Commodity name: CWS 500N3 low frequency simulator, 10 Hz-250 kHz
- Commodity ID: 1064482377402306560
- 品牌11: EMTEST
- 行业: 军品,汽车电子和整车
- 描述: The CWS 500N3 is mainly used in automotive and aerospace applications. Various international and military standards require low frequency magnetic field testing.
- 品牌: EM TEST
CWS 500N3 - Ripple Noise and Magnetic Field Radiation Testing

The CWS 500N3 is primarily used in automotive and aerospace applications. Various international and military standards require low frequency magnetic field testing. The CWS 500N3 is based on a combined and integrated design concept, providing you with the best solution for these test requirements.

It meets SAE J1113-2, ISO11452-8, DO 160D/E (Section 18) and MIL-STD-461D/E (CS101, CS109 and RS101) standards.
main feature:

Ultra-miniature AC/DC Power Line Ripple Noise and Magnetic Field Radiation Simulator

Built-in low frequency signal generator

Built-in low frequency amplifier

Built-in 2:1 low frequency transformer

Built-in frequency selective voltage and current meter

Built-in load resistor

automatic calibration

Standards compliant:

Chrysler CS-11979

Daimler Chrysler DC-10614

Daimler Chrysler DC-10615

DO 160 Section 18

Fiat 7.Z0450 (2004)

Ford EMC-CS-2009.1

Ford FMC1278

GMW 3097 (2006)

ISO 11452-10

ISO 11452-8

Jaguar EMC-CS-2010JLR V1.1 (2011-01)

MIL STD 461 D CS 101

MIL STD 461 D CS 109

MIL STD 461 D RS 101

MIL STD 461 E CS 101

MIL STD 461 E CS 109

MIL STD 461 E RS 101

MIL STD 461 F CS 101

MIL STD 461 F CS 109

MIL STD 461 F RS 101

MIL STD 461 G CS 101

MIL STD 461 G CS 109

MIL STD 461 G RS 101

PSA B21 7110

Renault 36.00.808/--G

Renault 36.00.808/--H

Renault 36.00.808/--J

Renault 36.00.808/--K

SAE J1113-2

Tata TST/TS/WI/257

Volvo STD 515-0003

VW TL 825 66

advantage:

All-in-one low frequency test equipment - simple, fast and reliable

CWS 500N3 is based on the design concept of combination and integration, providing you with the optimal solution for conducting low-frequency and low-frequency magnetic field immunity tests. CWS 500N3 includes the standard required low frequency signal generator, audio amplifier, 2:1 low frequency transformer, frequency selective current voltage monitor and load resistor. The remote control software icd.control supports the test program, controls external measuring equipment and automatically generates test reports with all test data.

software:

icd.control - form a complete low frequency test system

The standard library of icd.control software supports low-frequency conduction immunity and low-frequency magnetic field immunity testing, in line with international standards and manufacturer standards. And can generate a test report containing all test results.

Other models:

DC - 1GHz Continuous Wave Simulator

Continuous wave simulation has a history of more than 90 years. The CWS 500N series products not only cover most of the frequency ranges required for industrial test applications based on the IEC 61000-4-6 standard, but EM TEST also provides special test solutions for low frequency ranges or high current injection, as well as for automotive, TEM cell and microwave test solutions for aerospace and military applications.

The CWS 500N4 can meet the requirements of the IEC 61000-4-16 standard for low-frequency testing applications of electrical and electronic equipment with common mode interference applied to power lines, control, signal and AC ports.

Specific indicators:

General Output Characteristics (Amplifiers)
Frequency Range Voltage Range	10Hz - 250kHz
signal power	100 W (nominal)
signal level	0.001 V - 7 V rms max
signal current	15 A rms max
harmonic distortion	> -20 dBc at 100 W 0.5 ohm
overcurrent protection	Short circuit protection when the current is greater than 15 A rms
overvoltage protection	Overvoltage protection is performed when the feedback voltage of the tested equipment is higher than 60 V
low frequency indicator	LED display low frequency output status
LCD	Displayed test voltage and frequency
Measurement
overview	Frequency Selective Instruments for Voltage, Current and Magnetic Fields
frequency	10Hz - 250kHz
precision	Better than 5%
electric current	1 mA - 16 A rms monitored by 0.02 ohm shunt resistor
Voltage	0.5 mV - 12 V rms
magnetic field	50 ohm input, ring sensor
Coupled to the battery supply line
transformer	Impedance ratio 1 : 4
Frequency Range	10Hz - 250KHz
DUT load	DC 60 V, maximum current 30 A
DUT load	AC 300 V, maximum current 20 A
coupling capacitance	100 uF / 10 uF, parallel to the DC power supply
output impedance	< 0.5 ohm for frequencies less than 80 kHz
MIL STD 461 D/E, CS 101, CS 109, RS 101
CS 101 STD 461D	Ripple Voltage AC/DC, 30 Hz - 50 kHz
CS 101 STD 461E	Ripple Voltage AC/DC, 30 Hz - 150 kHz
CS 109	Case current, 60 Hz - 100 kHz
RS 101	Magnetic field (Army, Navy), 30 Hz - 100 kHz
calibration resistor	Built-in 0.5 ohm power resistor
DO 160 D/E SECTION 18
Cat A	AC and DC ports, 10 Hz - 150 kHz
Cat B	DC (14 V / 28 V) port, 200 Hz - 15 kHz
Cat E	AC (5 V - 140 V) port, 750 Hz - 15 kHz
Cat Z	DC (28 V) port, 10 Hz - 150 kHz
SAE J1113-2, Conducted Immunity
level control	Closed Loop and Alternative
Frequency Range	30Hz - 80kHz (250kHz)
frequency step	According to the test plan
test level	0.15 Vpp / 0.5 Vpp / 1.0 Vpp / 3.0 Vpp
calibration resistor	Built-in 4 ohm power resistor
injection current	limited to a maximum of 1 A during the test
ISO 11452-8, Magnetic Field Emissions
level control	Alternative
Frequency Range	15Hz - 150kHz
frequency step	According to the test plan
test level	According to standard appendix A, 30A/m, 100A/m, 300A/m, 1,000A/m
test program
Quick start test program	Instant start, easy and fast
service program	service, settings
interface
serial interface	USB
parallel interface	IEEE 488, addresses 1 - 30
Failure Detection 1	BNC input, active low to terminate test
Failure Detection 2	BNC input, save the test state (up to 10 events) when the low level is active, and the test continues
general data
size	19" / 6 HU (500mm x 448mm x 286mm)
weight	36kg
supply voltage	115 V or 230 V +10 / -15%, 50 / 60Hz
input power	600W max
power factor	cos (phi) = 0.96 at maximum output power compliant with IEC 555
fuse	2 x 6.3 AT(115V) or 2 x 3.15 AT(230V)
cool down	active cooling, air cooling
Environmental requirements
temperature	10 °C -40 °C
Relative humidity	85% maximum, non-condensing
atmospheric pressure	86 kPa - 106 kPa
appendix
radiation ring	for magnetic field testing
field sensor	for magnetic field measurements
icd.control	Expandable multifunctional remote control and reporting software. Contains the standard library for test setup. Composite interrupt function automatically controlled by IEEE device or manually controlled. It is suitable for complex test programs based on vector definition and can be extended.