VCS 500N10T Surge and Communication Surge Simulator-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

VCS 500N10T Surge and Communication Surge Simulator

Brand:

EM TEST

VCS 500N10T Surge and Communication Surge Simulator

Product Description
Main features
Technical parameters

- Commodity name: VCS 500N10T Surge and Communication Surge Simulator
- Commodity ID: 1064636857464803328
- 品牌11: EMTEST
- 行业: 民用
- 描述: The occurrence of surge pulses is caused by lightning directly or indirectly hitting outdoor circuits.
- 品牌: EM TEST
　　Combined Wave Simulator

　　Surge pulses are caused by lightning directly or indirectly hitting outdoor circuits. This will cause a transient high voltage or high current from an electrical current or electromagnetic field. In addition, switching transients from switching glitches and system faults are another source of surges. Due to the nature of this phenomenon, almost all electrical and electronic equipment is affected by surges, which further justifies the need for extensive surge testing. The surge voltage to be tested should be as large as several thousand volts, and the surge current should be several thousand amperes.
main feature:

　　Surge voltage up to 10 kV

　　Inrush current up to 5 kA

　　Communication surge voltage up to 10 kV

　　Communication surge current up to 666 A

　　with voltage/current monitor

　　Built-in single-phase 16 A coupling/decoupling network

　　warning light control

　　Security lock

　　Standard Test Procedure

　　USB and GPIB interface

Standards compliant:

　　EN 300386 V1.3.2

　　EN 61000-4-5

　　IN 61000-4-9

　　IEC 60255-22-5

　　IEC 61000-4-5

　　IEC 61000-4-9

　　IEC 61326

　　IEC 61850-3

　　ITU-T K.12

　　ITU-T K.20

　　ITU-T K.21

　　ITU-T K.45

advantage:

　　VCS 500N10T - Small Surge/Communication Surge Simulator with Built-in Coupling/Decoupling Network

　　The VCS 500N10T can perform combined surge tests and communication surge tests up to 10 kV. It also has a built-in single-phase coupling/decoupling network for single-phase AC power port and communication port testing. Equipped with an external coupling/decoupling network, surge combined wave testing can be performed on power lines rated at 100 A per phase or more. No matter whether the coupling/decoupling network is connected or not, by selecting the desired coupling method, the source impedance value and coupling capacitance value will be automatically set.

　　VCS 500N10T has a failure detection function for monitoring the level of the equipment under test. Peak voltage and peak current can not only be displayed on the front panel, but also can be uploaded to the software and recorded in the test report. In addition, the VCS 500N10T includes safety features such as access control warning lights and safety interlocks.

　　Pre-programmed standard test routines are easy to use. Through the quick start test program of VCS 500N10T, the user can adjust the test parameters online during the test, so as to evaluate the sensitivity threshold of a single device under test. This feature is most suitable for product development testing.

　　Through the front panel menu and function keys, users can quickly and accurately edit the test program. The control cursor is used to quickly control all test parameters of the programmed test program, which makes the test process very simple and ensures that each test step can be carried out correctly.

controlling software:

　　Control and report generation software iec.control

　　iec.control is a very user-friendly control software. It is easy to use, has a clear user interface structure and strong flexibility. Various operating functions and EM TEST standard information library allow users to easily complete custom test procedures. It can automatically identify the connected EM TEST test equipment and perform automatic configuration. Its powerful reporting function can help users generate test reports that meet international requirements.

　　iec.control supports Windows 7, Windows 8 (64Bit) and Windows 10 operating systems. Remote control is done via USB or GPIB interface. iec.control is compatible with various GPIB cards of National Instruments.

Accessory equipment:

　　CNI 503 - Three-phase coupling/decoupling network for burst and surge testing

　　EM TEST provides a series of fully automatic three-phase coupling/decoupling networks for burst and surge testing to expand the testing capabilities for three-phase equipment under test. The nominal current of the network can be up to 100 A.

　　CNV 503 - Three-phase coupling/decoupling network for surge testing

　　EM TEST provides a series of fully automatic three-phase coupling/decoupling networks for surge testing, which can expand the test capability for three-phase equipment under test, and the rated current of the network can reach up to 100 A.

　　CNV 504N/508N - Signal/Data Line Coupling/Decoupling Networks for Surge Testing

　　CNV 504N / 508N coupling/decoupling network can couple surge pulses to I/O lines, signal/data lines and communication lines, meeting the requirements of IEC 61000-4-5 Ed 3.0 standard.

　　CNV 504S/508S - Coupling/Decoupling Networks for Communication Surge Tests

　　CNV 504S / 508S coupling/decoupling network can couple communication surge pulses to communication lines, meeting the requirements of IEC 61000-4-5 Ed 3.0 standard.

appendix:

　　MS 100N - Magnetic field coil for power frequency and pulsed magnetic field testing

　　MS 100N is a 1 m * 1 m magnetic field coil, which meets the requirements of IEC / EN61000-4-8 and IEC / EN 61000-4-9 standards. The coil moves easily, is height-adjustable, and swivels 360 degrees. When it is necessary to generate low-level power frequency magnetic field strength, the current transformer MC 2630 can be used together. For high-level field strength tests above 100 A/m, MC 26100 current transformers are required.

Specific indicators:

surge simulator
AC Mains Port Test, IEC 61000-4-5 Standard Pulse 1.2 / 50 US - 8 / 20 US
open circuit voltage	500 V - 10,000 V ± 10%
Rise Time	1.2 us ± 30%
Pulse half peak time	50 us ± 20%
short circuit current	250 A - 5,000 A
Rise Time	8 us ± 20%
Pulse half peak time	20 us ± 20%
polarity	positive, negative, alternating
counter	1 - 30,000 or unlimited
Communication port test, IEC 61000-4-5 standard pulse 10 / 700 US - 5/320US waveform
open circuit voltage	500 V - 10,000 V ± 10%
Rise Time	10 us ± 30%
Pulse half peak time	700 us ± 20%
short circuit current	12.5A - 250A
Rise Time	5 us ± 20%
Pulse half peak time	320 us ± 20%
Energy storage capacitor	20 uF
source impedance	40ohm (15ohm from generator, 25ohm to communication line)
polarity	positive, negative, alternating
counter	1 - 30,000 or unlimited
Communication test, ITU and ETS standard pulse 10 / 700 US waveform
open circuit voltage	500 V - 10,000 V ± 10%
Rise Time	10 us ± 30%
Pulse half peak time	700 us ± 20%
Energy storage capacitor	20 uF
polarity	positive, negative, alternating
counter	1 - 30,000 or unlimited
trigger circuit
trigger method	Automatic, manual, external trigger
CRO trigger	Oscilloscope 5 V trigger signal
Synchronize	AC power port, 0° - 360°
Pulse output
direct output	Output via high voltage connector: - Zi = 2 ohm: 1.2 / 50us -8 / 20us - Zi = 15 ohm: 10 / 700 us - 5 / 320 us
Coupled to the power port as required by the following standards
	An external coupling and decoupling network is required
IEC 61000-4-5	Line-to-line coupling, 2ohm line-to-ground coupling, 12ohm
IT-T	Line-to-line coupling, 2ohm line-to-ground coupling, 2ohm
Coupled to the communication port as required by the following standards
IT-T	2 wires: T1, T2, 25 ohm each 4 wires: T1, T2, T3, T4, 25 ohm each
FCC part 68	2 wires: T1, T2, 25 ohm each
IEC 61000-4-5	4 wires: T1, T2, T3, T4, 25 ohm each
Measurement
CRO voltage monitoring	10 Vp corresponds to 10,000 V
CRO current monitoring	10 Vp corresponds to 5,000 A
peak voltage	10,000 V, LCD display
peak current	5,000 Amps, LCD display
test program
Quick Start	Instant start, simple and fast
Standard Test Procedure	Conforms to IEC 61000-4-5 standard, test level 1-4 complies with ITU-T standard
user testing program	Change polarity after N pulses Change coupling after N pulses Change voltage after N pulses Change phase angle after N pulses
Serve	Service, Setup, Self-Test
interface
serial interface	Optical link with 3 m long cable, USB Type A connector
parallel interface	IEEE 488, addresses 1 - 30
Coupled network interface	control external coupling network
Safety
safety circuit	Control input (24 V DC)
Warning Light	floating output contact
general data
size and weight	19" /12 HU, about 44 kg
supply voltage	115 / 230 V +10 / -15%
fuse	2 x T 2 AT(230 V)或 2 X T 4 AT(115 V)
Environmental requirements
temperature	10 °C -35 °C
Relative humidity	30 % - 75 %, non-condensing
atmospheric pressure	86 kPa - 106 kPa
appendix
Power Line Coupling/Decoupling Networks
CNI 503S16	Three-phase coupling/decoupling network 3x440V/16A for EFT burst and surge testing
CNI 503S18	Three-phase coupling/decoupling network 3x440V/32A for EFT burst and surge testing
Signal line/communication line coupling/decoupling network
general data	4-wire communication line coupling/decoupling network complies with IEC 61000-4-5 Ed.3 standard Fig.9
CNV 504N3	Coupling/decoupling network for 4-wire signal line testing up to 10 kV
CNV 508N3	Coupling/decoupling network for 8-wire signal line testing up to 10 kV
Communication Line Coupling/Decoupling Network
CNV 504T5	4-wire unshielded symmetrical line (communication line) coupling and decoupling network according to IEC 61000-4-5 standard Ed 3.0 (fig. 10)
CNV 508T5	8-wire unshielded symmetrical line (communication line) coupling and decoupling network conforming to IEC 61000-4-5 standard Ed 3.0 (fig. 10)
CNV 504S10	Impedance network 4 x 25ohm, test voltage 10kV
High-speed communication line coupling/decoupling
CNI 508N1 Assembly	Applied to shielded or unshielded wire
CNI 508N1	Coupling/decoupling networks for shielded high-speed communication lines
CNI 508N1	Coupling network of unshielded high-speed communication lines
SPN 508N1	Protection network for auxiliary equipment with unshielded wires
option
IMN 2	Impedance matching adapter for connection between direct output port and 2 ohm source impedance
MS 100N	Pulse magnetic field test field coils according to IEC 61000-4-9 up to 2,000 A/m