MPG 200S21 Automotive Micropulse Generator-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

MPG 200S21 Automotive Micropulse Generator

Brand:

EMTEST

MPG 200S21 Automotive Micropulse Generator

Product Description
Main features
Technical parameters

- Commodity name: MPG 200S21 Automotive Micropulse Generator
- Commodity ID: 1064629001571160064
- 品牌11: EMTEST
- 行业: 汽车电子和整车
- 描述: When the inductive load is disconnected from the DC source, a micropulse occurs in the battery-powered system.
- 品牌: EMTEST
　　Micropulses occur in battery powered systems when the inductive load is disconnected from the DC source. These pulses are of moderate energy with rise times in the low microsecond range, ranging between tens or hundreds/thousands of microseconds. Positive and negative polarity depends on whether the inductive load is passive (such as a heater) or active (such as a DC motor).

　　The MPG 200S21 has a built-in battery switch to interrupt the DC supply voltage as required by the standard. It is capable of generating pulses E1 and E2 that meet the requirements of the JASO D 001-94 standard.
main feature:

　　Discrete Test Equipment

　　Covers JASO D 001-94

　　Test pulses A2, B2 and D2

　　Built-in electronic battery switch

　　Built-in CDN60V/25A DC

　　Front panel operation

　　standard test path

　　RS232 and GPIB interface

Standards compliant:

　　RECEIVE D001-94

advantage:

　　MPG 200S21 - Standalone Micropulse Generator with Built-in Battery Switch

　　MPG 200S21 can independently complete the pulse E1 and E2 automotive electronic micro-pulse tests required by the JASO D 001-94 standard. The built-in electronic battery switch enables interruption of the DC supply voltage as required by the standard. MPG 200S21 including 60V/50A DC coupling/decoupling network is not only a stand-alone test equipment, but also can be well integrated into a complete test system.

　　The MPG 200S21 can be operated manually or controlled by software. Through the failure detection function, users can control the ongoing test sequence according to the status of the device under test. In terms of safety features, MPG 200S21 is equipped with warning lights and safety inner locks. Pre-programmed standard test procedures bring high convenience to user testing. In addition, MPG 200S21 also provides a quick start test program, users can change parameters online in real time, so as to evaluate the sensitivity level of the device under test.

　　

Waveform parameters

　　Vp : peak value of transient voltage

　　t1 : pulse period

　　t2 : battery switch switching time

　　E1 : battery supply voltage

　　tau: Decay time constant RC. The time depends on the peak voltage value to decay to 36.8%.

　　

controlling software:

　　Control and report generation software iso.control

　　iso.control is a very user-friendly control software. It is easy to use, has a clear user interface structure and strong flexibility. Various operating functions and EM TEST standard information library allow users to easily complete custom test procedures. It can automatically identify the connected EM TEST test equipment and perform automatic configuration.

　　iso.control complies with international/national standards and the requirements of most car manufacturers' standards, and the relevant information is always updated according to the changing situation of the standards. Its powerful reporting function can help users generate test reports that meet international requirements.

　　iso.control supports Windows 95/98, Windows ME, Windows NT, Windows 2000, Windows XP, Windows Vista and Windows 7 operating systems. Remote control is done via USB or GPIB interface. iso.control is compatible with various types of GPIB cards from National Instruments.

Specific indicators:

Pulse parameters
open circuit voltage	20 V - 500 V ± 10%
polarity	burden
pulse name	Pulse E
repetition rate	1.0 s - 99.0 s 1 s <= 100 V 、2 s <= 200 V 、3 s <= 300 V 4 s <= 400 V 、5 s > 400 V
PULSE E1 AS PER JASO D 001
capacitor voltage	V = -457 V
capacitance	C= 1000 uF
Rise Time	<1 us (0% - 100%)
Pulse duration	number (36.8%)= 26 ms ± 20%
R2 resistor	27 ohm ± 10%
R3 resistor	300 ohm ± 10%
polarity	burden
PULSE E2 AS PER JASO D 001
capacitor voltage	V = -320V
capacitance	C= 2000 uF
Rise Time	<1 us (0% - 100%)
Pulse duration	number (36.8%)= 26 ms ± 20%
R2 resistor	13 ohm ± 10%
R3 resistor	210 ohm ± 10%
polarity	burden
trigger circuit
trigger method	Automatic, manual, external trigger
battery power switch	Optional off time, T2=0.8s - 10.0s
output
DUT power +/-	Safety Lab Connector,Max. 60V/50A
coupling	to battery positive
decoupling	Battery powered switch
test program
Quick start test program	Instant start, simple and fast
user testing program	Change voltage after N pulses
service program	Service, Setup, Self-Test
general data
size and weight	19" / 3HU, 394 mm x 484 mm x 154 mm, about 13 kg
supply voltage	115 / 230 V +10 / -15%, 50/60 Hz
fuse	2x2 AT (115 V) or 2x1 AT (230 V)
interface
serial interface	USB
parallel interface	IEEE 488, addresses 1 - 30
environment
temperature	10 °C to 35 °C
Relative humidity	30 % to 70 %, non-condensing
atmospheric pressure	86 kPa - 106 kPa
option
iso.control	Test control software, built-in standard library, with test report generation and data conversion functions