CA LV124, Calibration Device for OEM LV124 and OEM LV148-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

CA LV124, Calibration Device for OEM LV124 and OEM LV148

Brand:

EM TEST

CA LV124, Calibration Device for OEM LV124 and OEM LV148

Product Description
Main features
Technical parameters

- Commodity name: CA LV124, Calibration Device for OEM LV124 and OEM LV148
- Commodity ID: 1064615360851496960
- 品牌11: EMTEST
- 行业: 汽车电子和整车
- 描述: The LV 124 defines a reference measurement, each of which is 100 ohms (± 5%) and 1 ohm (± 5%), which must be performed and recorded as a DUT replacement.
- 品牌: EM TEST
LV 124 defines a reference measurement, each of 100 ohms (±5%) and 1 ohm (±5%), that must be performed and documented as a DUT replacement. This test setup must provide verification of edge steepness. The low inductance part must be used as a resistor.
Standards compliant:

　　BMWGS 95024-2-1

　　MBN LV 124-1

　　OEM LV 124

　　OEM LV 148

　　VW 80000

Power cord test steps:

　　LV 124 defines a reference measurement, each of 100 ohms (±5%) and 1 ohm (±5%), that must be performed and documented as a DUT replacement. This test setup must provide verification of edge steepness. The low inductance part must be used as a resistor.

　　LV 148 defines equivalent reference measurements for 1000 ohms and 10 ohms.

　　The load resistor must have the following characteristics to achieve the desired pulse parameters:

　　- Low inductance components

　　- Shortest cable to PFM output (a few centimeters)

　　- The probe must be placed as close as possible to the load resistor, or as with the CA LV 124-P, directly at the load using a BNC connection.

　　

Data line test steps:

　　A reference measurement must be made and documented using 1 kohm (±5%) and 1 ohm (±5%) as surrogates for the DUT. This test setup must provide verification of edge steepness. The low inductance part must be used as a resistor.

　　During the test, all even and odd I/O lines are alternately toggled simultaneously. Ensure that only one line is being charged at a time by testing the adapter.

　　

controlling software:

　　Power cord settings

　　Selecting Edge Verification in the software allows selection of reference measurements. There is a test window for recalling the reference measurement setup.

　　1: Edge Verification: Select this option to perform a reference measurement.

　　2: Test window for reference measurement

　　

　　Data line settings

　　Selecting Edge Verification in the software allows selection of reference measurements. There is a test window for recalling the reference measurement setup.

　　1: Edge Verification: Select this option to perform a reference measurement.

　　2: Test window for reference measurement

Specific indicators:

CA LV 124 Components
CA LV124-P1R	Power Line Load Resistance
CA LV124-P100R	Power Line Load Resistance
CA LV124-D1R	Data Line Load Resistance
CA LV124-D1000R	Data Line Load Resistance
BNC cable	BNC measurement cable 2m, power line verification
power cable	Red/black 2 wires, 0.5m long, signal data wire verification
CA LV 148 Components
CA LV148-P10R	Power Line Load Resistance
CA LV148-P1000R	Power Line Load Resistance
BNC cable	BNC measurement cable 2m, power line verification
CA LV 124-P1R
Wire	power cable
Resistance	1 ohm
Accuracy	± 1 %
maximum voltage	12 V
Maximum power	30 W, (150 W, 1 s peak)
size	185 mm x 105 mm x 58 mm
weight	1.05 kg
CA LV 124-P100R
Wire	power cable
Resistance	100 ohm
Accuracy	± 1 %
maximum voltage	100 V
Maximum power	30 W, (100 W, 1 s peak)
size	185 mm x 105 mm x 58 mm
weight	0.90 kg
CA LV 124-D1R
Wire	data line
Resistance	1 ohm
Accuracy	± 2%
maximum voltage	2 V
Maximum power	1 W, (4W, 1 s peak)
size	120 mm x 65 mm x 40 mm
weight	0.15 kg
CA LV 124-D1000R
Wire	data line
Resistance	1000 ohm
Accuracy	± 2%
maximum voltage	40 V
Maximum power	1 W, (4W, 1 s peak)
size	120 mm x 65 mm x 40 mm
weight	0.15 kg
general data
temperature	10 °C to 35 °C
Relative humidity	25 % - 75 %, non-condensing
atmospheric pressure	86 kPa - 106 kPa