AIF 503N Series Three-Phase Scintillation Impedance-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

AIF 503N Series Three-Phase Scintillation Impedance

Brand:

EM TEST

AIF 503N Series Three-Phase Scintillation Impedance

Product Description
Main features
Technical parameters

- Commodity name: AIF 503N Series Three-Phase Scintillation Impedance
- Commodity ID: 1064708844522459136
- 品牌11: EMTEST
- 描述: The AIF 503N series is a three-phase flicker impedance, and the whole series of products can cover the current range of 16 A - 75 A per phase.
- 品牌: EM TEST
　　The AIF 503N series is a three-phase flicker impedance, and the whole series of products can cover the range of each phase current from 16 A to 75 A. Able to provide two different impedance values, the reference impedance value according to EN / IEC 61000-3-3 and IEC 60725 standards and the test impedance value according to EN / IEC 61000-3-11 standard, the latter is used for testing Instruments and equipment connected to public low-voltage power supply systems with a supply current greater than or equal to 100 A.
Main features :

　　Impedance values comply with IEC/EN 61000-3-3 and IEC/EN 61000-3-11 standards

　　Unsaturated Air Coil Inductors

　　Line voltage 3 x 400 V

　　Up to 75 A per phase (model dependent)

　　Automatic overcurrent protection

　　LED indicators show test status

　　Remotely controlled by DPA 503N

Standards compliant:

　　IN 61000-3-11

　　EN 61000-3-3

　　IEC 60725

　　IEC 61000-3-11

　　IEC 61000-3-3

　　HE C 61000-3-2

advantage:

　　Three-phase flicker impedance, up to 75A

　　The AIF 503N series offers impedance values to meet the needs of both test applications (except AIF 503N16). It can not only provide the flicker impedance value that meets the requirements of the IEC 60725 standard flicker measurement and the IEC/EN 61000-3-3 standard, but also can provide the DUT with a rated current greater than 16A and connected to a low-voltage power supply network with a supply current greater than 100A. Impedance value required for flicker measurement.

　　The AIF 503N series uses unsaturated air coil inductors, and the inductance value is set manually.

　　The AIF 503N series is used in conjunction with the DPA 503N and is capable of single-phase and three-phase measurements. The software dpa.control enables complete remote control of the AIF 503N series. LED indicators on the front panel show the current application mode. The AIF 503N32/-N63/-N75 models are equipped with a cabinet with wheels, which can accommodate DPA 503N at the same time, which is very convenient to use.

Model overview

AIF 503N model
AIF 503N16	Three-phase 16A flicker impedance
AIF 503N32.1	Three-phase 32A flicker impedance
AIF 503N63.1	Three-phase 63A flicker impedance
AIF 503N75.1	Three-phase 75A flicker impedance

specific indicators

AIF 503N16
Phase current voltage range	16 A per phase
Three-phase output connector	CEE type connector, 16 A (3P, N, PE) 4 mm banana plug
Single-phase output connector	One output connector per phase (L1,L2,L3) Adapter form depends on the country of use
Power supply	115 / 230 V，25W，50 / 60 Hz
size	19" / 3 HU
weight	about 20 kg
AIF 503N32.1
Phase current voltage range	32 A per phase
Three-phase output connector	CEE type connector, 32 A (3P, N, PE) 4 mm banana plug
Single-phase output connector	One output connector per phase (L1,L2,L3) Adapter form depends on the country of use
single phase low current	Connect the L1 phase Range: 100mA - 10A
Power supply	115 / 230 V，200W，50 / 60 Hz
size	19" / 25 HU with cabinet on removable casters
weight	100 kg
volume	1245 mm x 553 mm x 780 mm
AIF 503N63.1
Phase current voltage range	63 A per phase
Three-phase output connector	High current safety connector 80 A
Single-phase output connector	One output connector per phase (L1,L2,L3) Adapter form depends on the country of use
single phase low current	Connect the L1 phase Range: 100mA - 10A
Power supply	115 / 230 V，200W，50 / 60 Hz
size	19" / 38 HU, cabinet with removable casters
weight	230 kg
volume	1800 mm x 600 mm x 800 mm
AIF 503N75.1
Phase current voltage range	75 A per phase
Three-phase output connector	High current safety connector 80 A
Single-phase output connector	One output connector per phase (L1,L2,L3) Adapter form depends on the country of use
single phase low current	Connect the L1 phase Range: 100mA - 10A
Power supply	115 / 230 V，200W，50 / 60 Hz
size	19" / 38 HU, cabinet with removable casters
weight	250 kg
volume	1800 mm x 600 mm x 800 mm
General Data (All Models)
universal
configuration	Three-phase (3L, N, PE)
line voltage	3 x 400 V ± 10%
line frequency	47 Hz - 63 Hz
Bypass Harmonics Test	remote control switch
interface	15-pin SubD connector (remote control by DPA 503N)
indicator	LED indicators show operating status (bypass or current impedance in use)
impedance
Reference impedance, 50Hz	RA = 0.24 ohm,XA = 0.15 ohm RN = 0.16 ohm，XN = 0.10 ohm
Test impedance, 50Hz	RA = 0.15 ohm,XA = 0.15 ohm RN = 0.10 ohm，XN = 0.10 ohm (not for AIF 503N16)
precision	Better than 3%
	The inductor is an unsaturated air coil inductance, and the inductance value is set manually
Environmental requirements
temperature	0°C - 35°C
Relative humidity	80 %, non-condensing
atmospheric pressure	86 kPa - 106 kPa
cool down	Air Cooled, Active Cooling Control
option
Output connector for very low current VLCM Kit AIF 503N
Measurement output connector	Phase L1 with output connection for very low voltage
current range	5mA - 500mA
Accuracy	better than 1% of the measured value