ENV216 2-wire V-network-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

ENV216 2-wire V-network

Brand:

ROHDE&SCHWARZ

Product Description
Main features
Technical parameters

- Commodity name: ENV216 2-wire V-network
- Commodity ID: 1064710534785028096
- 品牌11: ROHDE&SCHWARZ
- 描述: The analog impedance is (50 μH 5Ω) | | 50Ω in the frequency range of 9 kHz to 30 MHz
- 品牌: ROHDE&SCHWARZ
　　The R&S®ENV216 2-wire V-network meets the requirements of CISPR 16-1-2 and EN 55016-1-2 for V-networks with an analog impedance of (50 μH + 5 Ω in the frequency range 9 kHz to 30 MHz ) || 50 Ω; and meet the relevant requirements of ANSI C63.4, the frequency range is 150 kHz to 30 MHz. A female connector with a protective earth contact is provided for connection to the EUT. Several models are available with country-specific fitting systems.
main feature:

　　Frequency range from 9 kHz to 30 MHz.

　　Power handling capacity up to 16 A, constant current (varies by country).

　　Analog Impedance (50 μH + 5 Ω) || 50 Ω per CISPR 16-1-2 Amd. 2:2006.

　　V-shaped network compliant with CISPR, EN, VDE, ANSI, FCC Part 15 and MIL-STD-461D, E and F.

　　Calibrated according to CISPR 16-1-2.

Features and Benefits:

　　Hollow core design and simulated hands

　　The R&S®ENV216 2-wire V-network is based on air-core inductors and includes a dummy hand.

　　Selectable switchable 150 kHz high-pass filter

　　To prevent the measurement receiver from being overloaded by high levels of low-frequency spectrum, a 150 kHz high-pass filter can be inserted.

　　Built-in 10 dB attenuator

　　To ensure standard impedance (regardless of receiver input attenuation), the R&S®ENV216 is equipped with a 10 dB attenuator.

　　Built-in pulse limiter (can be closed)

　　A built-in pulse limiter (can be turned off) protects the receiver input.

　　Remote control of TTL levels (compatible with Rohde & Schwarz measuring receivers)

　　The TTL control input is driven by a controller as well as a Rohde & Schwarz measurement receiver and can be used for remote control in automatic test systems (phase selection and activation of the high-pass filter). An optocoupler protects against external interference.

specific indicators

Frequency Range	9 kHz to 30 MHz
Impedance (magnitude and phase)	(50µH + 5Ω) \|\| 50Ω
Error limit ( according to CISPR16-1-2)	±20% amplitude , ±11.5° (phase)
Decoupling factor between power supply and receiver	>0 dB to 40 dB (increased linearly by logarithm of frequency) , 9 kHz to 50 kHz > 40dB, 50 kHz to 30 MHz
Maximum allowable AC voltage	0 V to 240 V AC + 10%
AC frequency	50 Hz to 60 Hz ± 5%
Maximum allowable DC voltage	0 V to 50 V DC voltage
Maximum Allowable Continuous Current - Model 12	16A
Maximum Allowable Continuous Current - Model 1 33	13A
Maximum Allowable Continuous Current - Model 1 4	16A
Maximum Allowable Continuous Current - Model 1 5	10A
Maximum Allowable Continuous Current - Model 1 6	15A
high pass filter	150 kHz , integrated, selectable switch
Response threshold of built-in pulse limiter	1 4 0dBuV (can be shut down)
Voltage division factor between EUT and test receiver	10 dB (with calibration data)
Maximum allowable EUT RF power	1 watt
AC mains voltage input for EUT	Socket with protective earth contact
AC power input	Plug with protective earth contact, and 1.8 m cable
Analog Hand Connector	4 mm fitting, female, with knurled clamp
protective earth connector	M 6 bolts
RF output connector	N母 50 Ω
remote control input connector	25-pin D-Sub , female
RF reference ground connector	Earth rod with 3 M 4 threads
External power connector ( located on the rear panel, powered by the provided plug-in power supply )	DC Cannula Ø5.5 mm, 2.1 mm, 10 V to 18 V DC, 250 mA
Operating temperature	+5°C to +40°C
storage temperature	-40°C to +70°C
Dimensions (WxHxD)	219 mm × 147 mm × 350 mm (8.6 in × 5.8 in × 13.8 in)
weight	5.5 kg