FFT3010_3030EMI measurement receiver-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

FFT3010_3030EMI measurement receiver

Brand:

AFJ

Product Description
Main features
Technical parameters

- Commodity name: FFT3010_3030EMI measurement receiver
- Commodity ID: 1064713185467715584
- 品牌11: AFJ
- 描述: Full FFT digital electromagnetic interference test receiver can measure 9KHz-300MHz conducted electromagnetic interference
- 品牌: AFJ
　　FFT 3010 & 3030 include preselector and preamplifier with advanced EMC testing software. PC integrated architecture of Windows 10 embedded operating system, FFT 3010 & 3030 EMI receiver can be controlled by advanced software to realize EMI test. Built-in preselectors provide excellent dynamic range and accurate EMI measurements. The frequency range covers 9 KHz-300 MHz. Remote control can also be performed from an external PC.

　　FFT3010 & 3030 built-in pre-selection amplifiers have excellent dynamic measurement range characteristics and provide extremely accurate electromagnetic compatibility testing. The measurement meets the requirements of international electromagnetic interference, European and product standards, and compares international standards through the measurement results The limit value and the corresponding detector measurement value are used to complete the test.
main feature:

　　FFT (Fast Fourier Transform) scan mode

　　Peak, quasi-peak, CISPR average

　　RMS (effective value) and CISPR RMS digital detector

　　Automatic insertion of attenuation during measurement sweeps avoids receiver saturation

　　Precise digital overload detector on analysis functions to avoid saturation effects

　　Correction of pulse weighting according to CISPR16-1-1 (from PRF 1Hz)

　　Quick test, fast detection of critical frequency (dwell time reduced to 1ms)

　　High sensitivity

　　Strong signal anti-jamming

　　low measurement uncertainty

　　high test speed

　　Test cable insertion loss, attenuator, amplifier loss, coupling network correction value, GTEM correction, antenna factor correction

　　Integrated Signal Generator

　　External reference frequency: 10MHz

　　Digital demodulation option with AM/FM/WBFM

Technical Parameters:

	FFT3010	FFT3030
frequency
Frequency Range	9kHz-30MHz	9kHz-300MHz
frequency setting	1Hz	1Hz
internal reference frequency
Aging per Year	2 x 10-6	2 x 10-6
temperature drift	15 x 10-5 (+10°C to +40°C)	15 x 10-5 (+10 °C to +40 °C)
external reference frequency	10MHz	10MHz
Measuring Time (Manual Mode)	1ms to 5s	1ms to 5s
resolution	1 ms	1 ms
Measurement Time (Sweep Mode)	1ms to 5s	1ms to 5s
resolution	1 ms	1 ms
frequency resolution
Digital CISPR EMI Bandwidth	200Hz (-6dB bandwidth) 9kHz (-6dB bandwidth)	200Hz (-6dB bandwidth) 9kHz (-6dB bandwidth) 120kHz (-6dB bandwidth)
Digital CISPR EMI Bandwidth	200Hz (-6dB bandwidth) 9kHz (-6dB bandwidth)
Preselection
tunable filter	9kHz to 150kHz 150kHz to 5MHz 5MHz to 10MHz 10MHz to 15MHz 15MHz to 20MHz 20MHz to 30MHz	9kHz to 150kHz 150kHz to 5MHz 5MHz to 10MHz 10MHz to 15MHz 15MHz to 20MHz 20MHz to 30MHz 30MHz to 60MHz 60MHz to 140MHz 140MHz to 300MHz



level
input level
DC voltage	50V (AC-coupled)	50V (AC-coupled)
CW RF power	+17dBm(InputAttenuation 0dB) +27dBm(Input Attenuation ≥10dB)	+17dBm(InputAttenuation 0dB) +27dBm(Input Attenuation ≥10dB)
Anti-jamming
mirror frequency	> 60dB	> 50dB
radio frequency shielding	3V/m (50Ωtermination)	3V/m (50Ωtermination)
noise floor
	BW 200Hz BW 9kHz	BW 200Hz BW 9kHz BW120kHz
Noise Floor (termination 50Ω, input attenuation 0dB, preamplifier off)
the peak	< 10dBµV	< 20dBµV
quasi-peak	< 0dBuV	< 15dBuV
CISPR average	< 0dBuV	< 10dBuV
RMS	< 0dBuV	< 10dBuV
CISPR RMS	< 0dBuV	< 10dBuV
Termination 50Ω, input attenuation 0dB, preamplifier on
the peak	< 0dBµV	< 10dBµV
quasi-peak	< -10dBuV	< 5dBuV
CISPR average	< -10dBuV	< 0dBuV
RMS	< -10dBuV	< 0dBuV
CISPR RMS	< -10dBuV	< 0dBuV
FFT scan mode
Dual A/D Converter Resolution	16 bit	16 bit
Sampling Rate	122.8MHz _ _ _	variable
FFT span	141kHz ( full CISPR band A FFT) 5 MHz ( a total of 6 frequency bands covering all CISPR band B)	141kHz ( full CISPR band A FFT) 5 MHz ( a total of 6 frequency bands covering all CISPR band B) 5 MHz ( a total of 54 frequency bands covering the frequency band 30MHz-300MHz)
Simultaneous Parallel Detector	3009 (Band A) 1669 (Band B)	3009 (Band A) 1669 (Band B) 211 (30MHz-300MHz)
FFT frequency resolution	46,875 Hz (Band A) 3kHz (Band B)	46,875 Hz (Band A) 3kHz (Band B) 24kHz (30MHz-300MHz)
input and output
RF input
impedance	50 Ω	50 Ω
Connector	N female (RF 9kHz-30MHz )	N female (RF 9kHz-30MHz ) (RF 30MHz to 300MHz)
Connector	N female (RF 9kHz-30MHz )	N female (RF 9kHz-30MHz ) (RF 30MHz to 300MHz)
VSWR	< 2.0:1.0 (Input Attenuation 0dB) < 1.2:1.0 (Input Attenuation ≥ 10dB)	< 2.0:1.0 (Input Attenuation 0dB) < 1.2:1.0 (Input Attenuation ≥ 10dB)
input attenuator	0dB to 30dB in 10dB steps	0dB to 30dB in 10dB steps
Integrated Signal Generator	+50dBuV~+90dBuV	+50dBuV~+90dBuV
generally
interface	Ethernet 10/100 MB Remotable LAN (LXI Level 0 Protocol)	Ethernet 10/100 MB Remotable LAN (LXI Level 0 Protocol)
interface	Ethernet 10/100 MB Remotable LAN (LXI Level 0 Protocol)	Ethernet 10/100 MB Remotable LAN (LXI Level 0 Protocol)
power supply	230Vac ± 50-60Hz	230Vac ± 50-60Hz
power consumption	50VA	50VA
operating temperature	0° to 45°C	0° to 45°C
storage temperature	-20° to 70°C	-20° to 70°C
Dimensions (WxHxD)	450 x 135 x 436mm	450 x 135 x 436mm
weight	12 kg	12 kg