LS16C/10_LT32C/10 LISN Artificial Power Network-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

LS16C/10_LT32C/10 LISN Artificial Power Network

Brand:

AFJ

LS16C/10_LT32C/10 LISN Artificial Power Network

Product Description
Main features
Technical parameters

- Commodity name: LS16C/10_LT32C/10 LISN Artificial Power Network
- Commodity ID: 1064713855088349184
- 品牌11: AFJ
- 描述: Comply with CISPR 16-1-2 international standard conducted electromagnetic interference measurement requirements, according to the electromagnetic interference international European standard and product standard measurement requirements, the measurement r
- 品牌: AFJ
　　Conforms to the CISPR 16-1-2 international standard conduction electromagnetic interference measurement requirements, according to the electromagnetic interference international European standard and product standard measurement requirements, the measurement range is from 9KHz to 30MHz, used for DC-63Hz power measurement, manual and program control are available.

　　Multi-phase line impedance stable V line network (50uH+5Ω)//50Ω, standard artificial simulation hand and protective grounding simulation network. Artificial power networks can also be used for DC conducted disturbance measurements.

　　The air-core coil design is used to avoid the saturation effect caused by high current, and the thick conductor coil ensures continuous large load current capability. Based on this design structure, the artificial power network can be easily used for electromagnetic interference testing in high power consumption environments.
Test application:

　　There are function buttons corresponding to the phase lines on the front panel of the artificial power network. You can manually select the phase lines (L1, N or L1, L2, L3, N) that need to be tested for conduction, or you can use the AFJ receiver or click analyzer Control software to automatically execute:

　　◆ AFJ FFT 3010 & 3030 series receivers

　　◆ AFJ DDA55 click analyzer

　　According to the requirements of CISPR16-1-2, the artificial analog hand can provide an analog resistance of 510Ω+220pF through the special interface on the front panel of the artificial power network.

　　The object under test generally has sufficient grounding protection conduction impedance (close to 1/4 wave wavelength). In the case of poor conductivity, the built-in artificial protection grounding will be used to perform the test.

　　When testing is performed with the DDA55 Click Analyzer, a built-in ammeter enables measurement of switching operation and EUT sink current in accordance with CISPR14-1.

　　LS 16C/10 and LT 32/10 have a built-in pulse limiter with 10dB attenuation.

Technical Parameters:

Product number
LS16C/10	10 ◆ 16A single phase
LT32C/10	10 ◆ 32A three-phase
technical specifications
	LS16C/10	LT32C/10
design	Fully compliant with CISPR 16-1-2 standard
Frequency Range	9kHz-30MHz
impedance	(50µH+5 Ω) // 50Ω
Rated voltage	230Vac rms	230Vac rms/450Vac rms
number of phases	1+N	3+N
rated current	2 x 16A	4 × 32A
maximum allowable frequency	Power supplyDC to 63Hz
output impedance	50 Ω
Connector	BNC receptacle
artificial hand	510Ω+220pF
protected area	50µH// 50 Ω
Built-in limiter and attenuator	10dB
Operating temperature	0 ～45℃
Storage temperature	-20 ～70℃
Dimensions (HWD, mm)	350 x 520 x 200mm	480 x 550 x 280mm
weight	11kg	28kg