Automotive transient emission measurement components-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

Automotive transient emission measurement components

Brand:

EM TEST

Automotive transient emission measurement components

Product Description
Main features
Technical parameters

- Commodity name: Automotive transient emission measurement components
- Commodity ID: 1064719725843075072
- 品牌11: EMTEST
- 描述: AN 20100N complies with ISO 7637-2,CISPR 25 / ISO 11452-4 and CISPR 16-1-2 standards, and can be switched as needed.
- 品牌: EM TEST
　　According to the ISO 7637-2 standard, the measurement of automotive transient emissions requires an electronic switch, a mechanical switch and an artificial power network. Electronic switches are used to generate slow transients; mechanical switches, which simulate typical relays used on vehicles, are used to generate fast transients; and artificial power networks simulate typical impedances on wiring harnesses.

　　AN 20100N complies with ISO 7637-2, CISPR 25 / ISO 11452-4 and CISPR 16-1-2 standards and can be switched as required.
main feature:

　　BS 200N100.1 - Electronic switches, 60 V DC / 100 A

　　Voltage drop < 1.2 V at 100 A, < 0.2 V at 25 A

　　Peak voltage up to 1,300 V

　　Reverse polarity/short circuit protection

　　BSM 200N40 - Mechanical switch, 12/24 V DC / 40 A

　　AN 200N100 - ISO 7637, CISPR 25, CISPR 16 compliant

　　Frequency range 100 kHz - 125 MHz

　　1,000 V DC, 250 V AC (up to 1 kHz)

　　Current max. 100 A AC/DC, continuous

　　Insertion loss < 3dB

Technical Parameters:

BS 200N100.1 - Electronic switches
Technical data
Operating Voltage	up to 60 V DC
Working current	100 A continuous
peak voltage	up to 1,300 V
electric shock	Up to 400 A at 200 ms
voltage drop	< 1.2 V at 100 A ; < 0.2 V at 25 A
overvoltage protection	via varistor
overload protection	Short circuit protection; reverse polarity protection
Switching characteristics
switching time	300 ns switching time +/- 20% with a test load of 50 uH / 0.6 ohm
on/off time	10 ms - 500 ms continuously selectable via potentiometer
operating mode	Prompted by LED lights
trigger
voltage monitoring	BNC output, voltage divider 1 : 200 +/-5%
trigger	BNC output, falling edge 0 V
general data
supply voltage	24 V DC, powered by power adapter
size	90mm x 125mm x 120mm ( LxWxH)
weight	about 1.3 kg
AN 200N100 - Artificial Power Networks Built-in coupling/decoupling network 80 V / 150 A
Technical data 150 ns ± 45 ns
fulfill the standard	ISO 7637-2 , CISPR 25, ISO 11452-4 and CISPR 16-1-2, switchable
Frequency Range	0.1 - 125 MHz
Operating Voltage	1,000 V DC / 250 V AC, up to 1 kHz
Working current	100 A AC/DC, continuous
electric shock	Up to 400 A at 200 ms
impedance	5uH // 50ohm , for more information see the diagram on page 2
Insertion loss	The device under test to the output of the receiver is less than 3 dB
inductance	5 uH +/-10% air core coil
coupling capacitance	0.1 uF
general data
power supply	High-current connectors up to 100 A
Connect to the device under test	4mm safety lab connector, up to 32 A
test output	BNC connection
size	318 mm x 126 mm x 122 mm
weight	about 2.8kg
BSM 200N40 - Mechanical switch
Technical data
Operating Voltage	12 V / 24 V
Working current	40 A DC continuous max., resistive load
peak voltage	40 A @13.5 V; 20 A @27.0 V
touch	High-purity silver contact material, non-suppressed relay contacts, insulated from coil circuits
Switching characteristics
switching time	> 50 ms up to 500 ms
on/off time	1 s to > 10 s
operating mode	Prompted by LED lights
trigger
manual	Trigger a single event manually
automatic	Automatic trigger, repetition frequency 0.1 Hz -1 Hz, continuously selectable by potentiometer
external	External trigger, falling edge 0 V, BNC input
operating mode	Prompted by LED lights
Measurement
voltage monitoring	BNC output, voltage divider 1 : 200 +/-5%
CRO trigger	BNC output, falling edge 0 V
general data
supply voltage	24 V DC, powered by power adapter
size	90mm x 105mm x 104mm ( LxWxH)
weight	about 0.8 kg
option
CA BS 200N	0.6 ohm / 50 uH calibration load. Used for electronic switch characteristic verification
RS-BOX	Shunt resistor box with the following resistors, Rs = 10 ohm, 20 ohm, 40 ohm and 120 ohm