VDS 200Q Series Four-Quadrant Voltage Sag Simulator-Battery Powered Simulation and DC Voltage Source-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

VDS 200Q Series Four-Quadrant Voltage Sag Simulator-Battery Powered Simulation and DC Voltage Source

Brand:

EM TEST

VDS 200Q Series Four-Quadrant Voltage Sag Simulator-Battery Powered Simulation and DC Voltage Source

Product Description
Main features
Technical parameters

- Commodity name: VDS 200Q Series Four-Quadrant Voltage Sag Simulator-Battery Powered Simulation and DC Voltage Source
- Commodity ID: 1064720353105432576
- 品牌11: EMTEST
- 描述: The VDS 200Q series is used to simulate a variety of battery-powered waveforms that meet international standards and many automobile manufacturers' standards. Among them, the automobile manufacturers' standards have become an important part of the VDS 200
- 品牌: EM TEST
　　VDS 200Q - Four Quadrant Battery Powered Simulator and DC Voltage Source.

　　VDS 200Q series is used to simulate a variety of battery power supply waveforms that meet international standards and the standards of many automobile manufacturers. Among them, the standards of automobile manufacturers have become an important part of the coverage of VDS 200Q series because of the complexity of the test requirements.

　　In addition, the VDS 200Q series can also be used as a powerful DC voltage source to power the device under test in the automotive transient pulse test. The VDS 200Q series meets all three supply voltage types of 42 V, 24 V and 12 V. Depending on the model and test application, the test current is up to 100 A.
main feature:

　　Maximum test voltage up to 60 V

　　Bipolar Amplifier Module

　　Four-quadrant operation

　　low output impedance

　　Powerful DC voltage source

　　Comply with ISO 7637-2 / ISO 16750-2 standard pulse 4 and pulse 2b test requirements

　　The input interface can be connected to an external signal generator to generate complex waveforms

　　Test software supports Windows 7 operating system

　　USB and GPIB interface

Technical Parameters:

VDS 200Q10
The output voltage	-60 V - +60 V
Output current	0 A - 10 A ，contact
Bandwidth (-3dB)	DC - 180 kHz full-band signal
supply voltage	Single phase 100 / 120 / 230 V ± 10% L, N, PE
size	19"/6 HU
weight	about 37kg
VDS 200Q25.1
The output voltage	-20 V - +77 V
Output current	0 A - 25 A, contact
peak current	75 A for a duration of up to 200 ms
Bandwidth (-3dB)	DC - 150 kHz full band signal
Extended parameters	-20 V - +77 V ( max. 20 A) 150 - 250 kHz ( up to 40 Vpp)
supply voltage	Single phase 100 / 120 / 230 V ± 10% L, N, PE
size	19"/25 HU*)
weight	about 230 kg
VDS 200Q50.1 Built-in coupling/decoupling network 80 V / 150 A
The output voltage	-20 V - +77 V
Output current	0 A - 50 A, contact
peak current	150 A for a duration of up to 200 ms
Bandwidth (-3dB)	DC - 150 kHz full band signal
Extended parameters	-20 V - +77 V ( max. 20 A) 150 - 250 kHz ( up to 40 Vpp)
supply voltage	Three-phase 200/400 V ±10% L1, L2, L3, PE
size	19"/25 HU*)
weight	about 275 kg
VDS 200Q100.1 150 ns ± 45 ns
The output voltage	-20 V - +77 V
Output current	0 A - 100 A, connect
peak current	300 A for a duration of up to 200 ms
Bandwidth (-3dB)	DC - 150 kHz full band signal
Extended parameters	-20 V - +77 V ( Max. 80 A) 150 - 250 kHz ( up to 40 Vpp)
supply voltage	Three-phase 200/400 V ±10% L1, L2, L3, PE
size	19"/38 HU**)
weight	about 450 kg
VDS 200Q150.2
The output voltage	-20 V - +77 V
Output current	0 A - 150 A, connected
peak current	450 A for a duration of up to 200 ms
Bandwidth (-3dB)	DC - 150 kHz full band signal
Extended parameters	-20 V - +77 V ( Max. 120 A) 150 - 250 kHz ( up to 40 Vpp)
supply voltage	Three-phase 200/400 V ±10% L1, L2, L3, PE
size	2 x 19"/34 HU**)
weight	about 650 kg
VDS 200Q200.2
The output voltage	-20 V - +80 V
Output current	0 A - 200 A, connect
peak current	600 A for a duration of up to 200 ms
Bandwidth (-3dB)	DC - 150 kHz full band signal
Extended parameters	-20 V - +80 V ( Max. 120 A) 150 - 250 kHz ( up to 40 Vpp)
supply voltage	Three-phase 200/400 V ±10% L1, L2, L3, PE
size	2 x 19"/34 HU**)
weight	about 900 kg
**) Equipped with a cabinet, and the cabinet space can also accommodate AutoWave and NR-RAC AutoWave
General Data (All Models)
General technical data
source impedance	Zi = < 10 mohm
operate	Four-quadrant, bipolar operation
current limiter	(not applicable to VDS 200Q10) 3x Imax: Before the current limiter starts, the inrush current is allowed to reach three times the rated current for 200 ms
compensate	STD: DC - 40 kHz HF: DC - >=150 kHz CAP: DC - 3kHz
recover	>90% , recovery time < 25 us
output rise time	typ. <10 us, <3 us ( high frequency)
voltage fluctuation	Ur <10 mVp-p , minimum frequency 400 Hz
control	input analog signal
cool down	Air-cooled, temperature controllable
Protect	Magnetic circuit breaker protection (depending on the specific model of VDS 200Q)
trigger
automatic trigger	Automatic release pulse
manual trigger	Manual release of individual pulses
external trigger	An external trigger releases a single pulse
output
Power supply of the device under test +/-	Safety lab connector or high current connector
external trigger	5 - 15 V TTL signal, BNC connector
CRO trigger	Oscilloscope 5 V TTL signal
interface
serial interface	USB , Ethernet interface (for optional AutoWave), IEEE 488, address 1 - 30
remote control	External signal generator can be connected (10 kohm) -10 V - +10 V / 0 - 150 kHz ( 180 kHz for VDS 200Q10 )
Arbitrary Waveform Test Procedure
DC source	Depends on VDS 200Q specific model
Function	Sine wave sweep pulse, sine wave ramp pulse, limiting load dump pulse, quick start pulse, external control pulse, GM9105P pulse 4, falling and overshooting pulse
Standard Test Procedure	ISO 7637 Pulse 2b and Pulse 4, ISO 16750-2
service program	service, setup, self-test
test environment
temperature	10 °C to 40 °C
Relative humidity	10 % to 90 % non-condensing
atmospheric pressure	86 kPa - 106 kPa
option
AutoWave	2- channel or 4-channel vehicle power supply system arbitrary waveform analog recorder to meet more complex testing requirements
PFM 200N100.1	Power failure simulator according to LV 124: E-10 and E-13, LV 148: E48-09. Controlled by AutoWave via bus interface.
PFM 200N200	200A PowerFail simulator for test requirements as per LV 124: E-10 and E-13 and LV 148: E48-09. Controlled by AutoWave via Framebus interface.
iso.control	Test control software, built-in standard library, with test report generation and data conversion functions