SBA9112 small biconical microwave antenna (3-18G)-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

SBA9112 small biconical microwave antenna (3-18G)

Brand:

SCHWARZBECK

SBA9112 small biconical microwave antenna (3-18G)

Product Description
Main features
Technical parameters

- Commodity name: SBA9112 small biconical microwave antenna (3-18G)
- Commodity ID: 1064727924499435520
- 品牌11: SCHWARZBECK
- 描述: SBA9112 meet CISPR 16-1-4 for site verification above 1GHz.
- 品牌: SCHWARZBECK
The SBA9112 meets CISPR 16-1-4 for site verification above 1GHz. The SBA 9112 was designed because there are no omnidirectional or dipole-like broadband antennas operating above 3GHz globally. Combined with the SBA 9113 A, it covers the frequency range from 0.5GHz to 18GHz with excellent antenna performance. Accepting some constraints (i.e. increased antenna factor and VSWR, reduced symmetry), the SBA 9112 can be used from 1GHz onwards. Validation of test sites using commonly used microwave antennas such as logarithmic or horn antennas will lead to insufficient results because directional gain antennas in these pattern sets do not take into account the characteristics of the test site.
main feature:

The SBA9112 meets CISPR 16-1-4 for site verification above 1GHz. The SBA 9112 was designed because there are no omnidirectional or dipole-like broadband antennas operating above 3GHz globally. Combined with the SBA 9113 A, it covers the frequency range from 0.5GHz to 18GHz with excellent antenna performance. Accepting some constraints (i.e. increased antenna factor and VSWR, reduced symmetry), the SBA 9112 can be used from 1GHz onwards. Validation of test sites using commonly used microwave antennas such as logarithmic or horn antennas will lead to insufficient results because directional gain antennas in these pattern sets do not take into account the characteristics of the test site.

Typical uses of microwave biconical antennas are evaluation of test sites, field strength (frequency selective) measurements and generation of specific field strengths (eg ERP or EIRP). Due to the broadband feature, there is no need to replace the antenna as frequently as the half-wave dipole antenna, thus saving measurement time. Microwave biconical antennas allow continuous sweeps to be performed over the entire frequency range. Due to its extremely small size, the SBA 9112 can also be used as a (highly linear) broadband near-field probe.

Nominal frequency range	3-18GHz
Available frequency range	1-18GHz
Connector	50 ohms; Type N receptacle
Balanced unbalanced (low loss)	1:1
Maximum input power	10W
Typical VSWR	1.5-5 (4 -18 GHz)
Index ring	LR=190mm
Total length of antenna element	LE =20 mm
Antenna element diameter	D = 9 mm
Install	22mm diameter tube, LH=560 mm
weight	420g