SBA9113 small double cone microwave antenna (0.5-3G)-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

SBA9113 small double cone microwave antenna (0.5-3G)

Brand:

SCHWARZBECK

SBA9113 small double cone microwave antenna (0.5-3G)

Product Description
Main features
Technical parameters

- Commodity name: SBA9113 small double cone microwave antenna (0.5-3G)
- Commodity ID: 1064728626667868160
- 品牌11: SCHWARZBECK
- 描述: SBA9113 meet CISPR 16-1-4 for site validation above 1GHz.
- 品牌: SCHWARZBECK
The SBA9113 meets CISPR 16-1-4 for site verification above 1GHz. The SBA 9113 was designed because there are no omnidirectional broadband antennas operating above 1GHz globally. Validation of test sites using commonly used microwave antennas such as logarithmic or horn antennas will lead to insufficient results because directional gain antennas in these pattern sets do not take into account the characteristics of the test site.
main feature:

The SBA9113 meets CISPR 16-1-4 for site verification above 1GHz. The SBA 9113 was designed because there are no omnidirectional broadband antennas operating above 1GHz globally. Validation of test sites using commonly used microwave antennas such as logarithmic or horn antennas will lead to insufficient results because directional gain antennas in these pattern sets do not take into account the characteristics of the test site.

The main uses of microwave biconical antennas are test site evaluation, field strength (frequency selective) measurements and generation of specific field strengths (eg ERP or EIRP). Due to the broadband feature, there is no need to replace the antenna as frequently as the half-wave dipole antenna, thus saving measurement time. Microwave biconical antennas allow continuous sweeps to be performed over the entire frequency range. Due to its similar pattern to dipole antennas, fixed phase center and high power handling capability, SBA 9113 can replace half-wave dipole antennas in many occasions.

SBA 9113 does not apply to radiated emission tests at very low limits. Horn and log antennas are better suited for this purpose due to their better antenna factors. A typical application of the SBA 9113 is the determination of field strength exposure in the vicinity of base stations in the GSM frequency band.

Frequency Range	0.5-3GHz
Connector	50 ohms; Type N female
Balanced unbalanced (low loss)	1:1
Maximum input power	20W
Typical VSWR	1-4
Index ring	LR=190mm
Total length of antenna element	LE =140 mm
Antenna element diameter	D = 49 mm
Antenna vibrator installation	M4
Install	22mm diameter tube, LH=560 mm
weight	750g