HL562E superlogarithmic antenna-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

HL562E superlogarithmic antenna

Brand:

ROHDE&SCHWARZ

Product Description
Main features
Technical parameters

- Commodity name: HL562E superlogarithmic antenna
- Commodity ID: 1064830943551442944
- 品牌11: ROHDE&SCHWARZ
- 描述: Superlogarithmic antenna R&S ® HL562E is used to measure emissions and electromagnetic interference (EMI&EMS) in the wide frequency range of 30MHz to 6000MHz.
- 品牌: ROHDE&SCHWARZ
　　The hyperlog antenna R&S®HL562E is used to measure emissions and electromagnetic interference (EMI&EMS) in a wide frequency range from 30MHz to 6000MHz. Measurement times are greatly reduced as there is no need to change the antenna. Symmetry and matching (VSWR) of the R&S®HL562E allows use in environmental management system measurements requiring field strengths of 10 V/m or higher. The R&S®HL562E combines the features of a biconical antenna and a log-periodic antenna. The log-periodic part of the antenna is V-shaped to improve system sensitivity, especially above 1GHz. This measure not only increases the antenna gain, but also is the reason why the H-plane radiation pattern is almost rotationally symmetric to the E-plane radiation pattern.

　　The R&S®HL562E is supplied without a tripod; the tripod shown is supplied additionally. When used with the R&S®HL562Z1 tripod, an RF cable with a 90° angled connector is required.
　　Extremely wide frequency range from 30MHz to 6000MHz

　　Suitable for sensitivity and emission measurements

　　The antenna does not change over the entire frequency range

　　The radiation pattern on the E-plane and H-plane is almost rotationally symmetric (frequency range from 200MHz to 6000MHz)

　　Stable radiation pattern across the frequency range ensures optimal illumination of the device under test

　　small size and light weight

　　High gain, low antenna factor

　　easy to operate

　　Optional movable tripod

Frequency Range	30 MHz - 6000 MHz
antenna polarization	linear
cross polarization	< -20 dB
Nominal Impedance	50 Ω
VSWR (above 200 MHz)	< 2 (typ.)
Gain (above 200 MHz)	8.5 dBi (typ.)
Maximum input power
30 MHz	225 W CW
80 MHz	900 W CW
250 MHz	750 W CW
1 GHz	420 W CW
3 GHz	270 W CW
6 GHz	150 W CW
RF connector	N receptacle
MTBF	> 200 000 h
application level	laboratory, anechoic chamber
range of working temperature	-40 °C ~ +40 °C
size
Width	about 0.57 m
high	about 1.43 m
long	about 1.65 m
weight	about 5 kg