Product
EMC Testing Solution Provider
UCS 500N7 Industrial electronic test ultra-small anti-jamming signal simulator
Brand:
EMTEST
- Product Description
- Main features
- Technical parameters
-
- Commodity name: UCS 500N7 Industrial electronic test ultra-small anti-jamming signal simulator
- Commodity ID: 1064534920727777280
- 品牌11: EMTEST
- 行业: 民用
- 描述: UCS 500N7 - State-of-the-art ultra-miniature combined immunity test equipment, fully compliant with IEC 61000-4-x and ANSI / IEEE C62.41 standards.
- 品牌: EMTEST
UCS 500N7 - State-of-the-art ultra-miniature combined immunity test equipment, fully compliant with IEC 61000-4-x and ANSI / IEEE C62.41 standards.
UCS 500N7 ultra-small simulator is a multi-functional test equipment that can meet various requirements of international standards (basic standards and common standards) and product series standards for transient, pulse, surge and voltage drop tests. The test voltage can be up to up to 7.0 kV.
For surge testing, in addition to meeting the requirements of IEC 61000-4-5, it also meets the testing requirements of ANSI / IEEE C62.41 for surge and ringing waves. UCS 500N7 is also the most economical fully compatible immunity test solution, which meets all requirements of EU CE certification immunity test. The built-in coupling/decoupling network is suitable for single-phase equipment testing, and the automatic control external coupling network (up to 100 A) can also be used for three-phase equipment testing.
-
main feature:
Ultra-compact anti-interference signal simulator with test voltage up to 7.0 kV
Electrical Fast Transient Burst Module (IEC / EN 61000-4-4)
Surge Module (IEC / EN 61000-4-5 Ed 3.0/-9)
Voltage drop module (IEC / EN 61000-4-11)
Ring wave module (IEC / EN 61000-4-12) option
Communication surge module (IEC / EN 61000-4-5) option
Power frequency magnetic field, pulse magnetic field test accessories - optional
Built-in 300 V / 16 A single-phase coupling network
USB and GPIB-BUS interface for remote control
Front panel manual operation
Peak voltage and peak current monitoring output ports
Failure detection function
0 - 10 V DC signal controls external automatic voltage regulator
Can control external three-phase coupling network
Standards compliant:
ANSI/IEEE C62.41
ECE-R10
IN 61000-4-11
IN 61000-4-12
IN 61000-4-29
EN 61000-4-4
EN 61000-4-5
IN 61000-4-8
IN 61000-4-9
EN 61000-6-1
EN 61000-6-2
IN 61543
IEC 60255-22-5
IEC 61000-4-11
IEC 61000-4-12
IEC 61000-4-29
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-8
IEC 61000-4-9
IEC 61008-1
IEC 61009-1
IEC 61326
IEC 61850-3
IEEE 1547
ITU-T K.20
ITU-T K.21
ITU-T K.45
UL 1741
UL 244
UL 943
advantage:
UCS 500N7 is capable of fully compatible anti-jamming test, and the test level it can achieve far exceeds the general test requirements. Surge test voltage up to 7.0 kV, meeting IEC 61000-4-5 and ANSI / IEEE C62.41 standard requirements. By matching the built-in ring wave module (option), UCS 500N7 can also conduct ring wave tests on power lines in compliance with ANSI / IEEE C62.41 and IEC 61000-4-12 standards.
The UCS 500N7 can be manually operated directly from the front panel, or remotely controlled via the built-in USB or GPIB interface. The failure detection function allows the user to control the ongoing test sequence based on the status of the device under test. The monitoring output port (BNC) helps users to measure and verify signals conveniently. In addition, UCS 500N7 also has security features such as self-locking and indicator lights.
Pre-programmed standard test routines are easy to use. Through the quick start test program of UCS 500N7, the user can adjust the test parameters online during the test, so as to evaluate the sensitivity threshold of a single device under test. This feature is most suitable for product development testing.
Through the front panel menu and function keys, users can quickly and accurately edit the test program. The control cursor is used to quickly control all test parameters of the programmed test program, which makes the test process very simple and ensures that each test step can be carried out correctly.
controlling software:
Control and report generation software iec.control
iec.control is a very user-friendly control software. It is easy to use, has a clear user interface structure and strong flexibility. Various operating functions and EM TEST standard information library allow users to easily complete custom test procedures. It can automatically identify the connected EM TEST test equipment and perform automatic configuration. Its powerful reporting function can help users generate test reports that meet international requirements.
iec.control supports Windows 7, Windows 8 (64Bit) and Windows 10 operating systems. Remote control is done via USB or GPIB interface. iec.control is compatible with various GPIB cards of National Instruments.
Other models:
UCS 500N series ultra-compact anti-interference signal simulators are used for EFT/Burst, Surge and Voltage Dip tests, including two test levels of simulators, the highest test voltage can reach 5.5 kV and 7 kV respectively.
Accessory equipment:
CNI 503 - Three-phase coupling/decoupling network for burst and surge testing
EM TEST provides a series of fully automatic three-phase coupling/decoupling networks for burst and surge testing to expand the testing capabilities for three-phase equipment under test. The nominal current of the network can be up to 100 A.
variac NX-1-260-16 - Automatic voltage regulator for voltage change testing
The variac NX-1-260-16 automatic voltage regulator is an alternative test solution for tapped transformers, capable of performing voltage dips, short interruptions and voltage changes in accordance with the requirements of the IEC 61000-4-11 standard. In addition, it can be used for automatic magnetic field testing.
V 4780 - Fixed tap transformer for voltage dips and short interruption tests
The V 4780 fixed tap transformer provides the voltage required for voltage dip and short interruption tests as required by the IEC 61000-4-11 Ed.2:2004 standard.
V 4780S2 - Tapped transformer for voltage dips and short interruption tests
The V 4780S2 tapped autotransformer supplies the required voltage for voltage dip and short interruption tests according to IEC 61000-4-11 Ed.2:2004. In contrast to the manually operated V 4780, the V 4780S2 can automatically switch taps according to the selected voltage level.
CNV 504N/508N - Signal/Data Line Coupling/Decoupling Networks for Surge Testing
CNV 504N / 508N coupling/decoupling network can couple surge pulses to I/O lines, signal/data lines and communication lines, meeting the requirements of IEC 61000-4-5 Ed 3.0 standard.
appendix:
MS 100N - Magnetic field coil for power frequency and pulsed magnetic field testing
MS 100N is a 1 m * 1 m magnetic field coil, which meets the requirements of IEC / EN61000-4-8 and IEC / EN 61000-4-9 standards. The coil moves easily, is height-adjustable, and swivels 360 degrees. When it is necessary to generate low-level power frequency magnetic field strength, the current transformer MC 2630 can be used together. For high-level field strength tests above 100 A/m, MC 26100 current transformers are required.
CCI - Capacitive Coupling Clamp
CCI capacitive coupling clamps fully meet the requirements of the IEC 61000-4-4 standard.
ITP - Immunity Test Probe Assembly
ITP is a product development diagnostic test tool. It includes a variety of near-field probes that can locate weak points in a system or on a printed circuit board. A burst simulator is used to generate interference signals.
CA EFT kit - Electrical Fast Transient/Burst Calibration Kit
According to the requirements of the IEC 61000-4-4 Ed.2 standard, the characteristics of the burst generator are verified by two different loads of 50 ohm and 1,000 ohm. EM TEST provides users with calibration components including these two load resistors and an adapter to verify the output port of the device under test.
CCI PVKIT 1 - Capacitive Coupled Clamp Calibration Kit
The IEC/EN 61000-4-4 standard Ed 3.0, published in 2012, recommends calibrating capacitive coupling clamps with a 50 ohm coaxial load. Connect the capacitive coupling clamp HFK to the 50 ohm output port of the electrical fast/transient burst simulator, and connect the insulating plate on the CCI/HFK to a 50 ohm coaxial load resistor, then the electrical fast transient of the capacitive coupling clamp can be Variable/burst waveform for verification.
-
Specific indicators:
Electrical Fast Transient Bursts The burst module EFT/N7 complies with EN/IEC 61000-4-4 Ed 3.0 and EN 61000-6-1, -6-2 standards Test voltage 200 V - 5,500 V ± 10%;
100 V - 2,750 V ± 10%, 50ohm loadPulse waveform 5 / 50 ns, 50 ohm and 1,000 ohm loads rise time tr 5 ns ± 30% into 50 ohm load;
5 ns ± 30% into 1,000 ohm loadPulse duration td 50 ns ± 30%, 50 ohm load;
50 ns -15 / +100ns, 1,000 ohm loadsource impedance 50 ohm polarity positive, negative trigger circuit trigger method Automatic, manual, external trigger Synchronize 0° - 360°, resolution 1° (16 - 500 Hz) burst duration td = 0.10 ms - 999 ms repetition rate tr = 10 ms - 9,999 ms Spike frequency f = 0.1 kHz - 1,000 kHz test duration T = 0:01 min - 99:59 min
T > 99:59 min --> infiniteoutput CRO trigger Oscilloscope 5 V trigger signal direct output Via 50 ohm coaxial connector Coupling method L, N, PE and various combinations The power supply of the device under test AC 300 V / 16 A, 50 / 60 Hz;
DC 300 V / 16 Atest program Quick Start Parameters can be adjusted online, simple and fast Standard Test Procedure According to IEC 61000-4-4, test level 1 - 4
according to EN 61000-6-1, -6-2
Manual setting of standard test proceduresuser testing program Synchronous burst output
Random burst output
Change voltage after T time
Sweep fixed number of pulses within single burst
Sweep
fixed burst duration
Change polarity after sweep T timeoption CCI Capacitive coupling clamp according to IEC 61000-4-4 standard KW 50 100:1 Voltage Divider, 50 ohm KW 1000 500:1 Voltage Divider, 1,000 ohm CA EFT kit Burst calibration kit, including KW50, KW1000, DUT port adapter and suitcase CCI PVKIT 1 Capacitive coupling clamp calibration adapter kit, consisting of
- sensor board: conforming to IEC / EN 61000-4-4 standard Ed 3.0
- support accessory: fixes the KW 50 adapter at the same
100 mm height as the capacitive coupling clampCA MC F Adapter, match the KW 50 load resistance to the power supply port of the equipment under test of the three-phase N series coupling network A6dB 6 dB attenuator, 50 ohms E.T.C Immunity test probe (generates electric field) ITP/H Immunity test probe (generates magnetic field) Combined wave/surge Surge module VCS/N7 complies with EN/IEC 61000-4-5 Ed 3.0 and EN 61000-6-1, -6-2 standards open circuit voltage 250 V - 7,000 V ± 10% Front time 1.2 us ± 30% Pulse half peak time 50 us ± 20% short circuit current 3,500 A max ± 10% Front time 8 us ± 20% Pulse half peak time 20 us ± 20% polarity positive, negative, alternating counter 1 - 30,000 or unlimited, optional trigger circuit trigger method Automatic, manual, external trigger Synchronize 0° - 360°, resolution 1° repetition rate Up to 0.5 Hz (2 s - 999 s) output CRO trigger Oscilloscope 5 V trigger signal direct output Output to external coupling network via high voltage connector (Zi = 2 ohm, optional adapter IMN 2) Coupling method According to IEC 61000-4-5:
Line-to-Line, 2 ohm; Line-to-Earth, 12 ohm
To ANSI/IEEE C62.41:
Line-to-Line, 2 ohm; Line-to-Earth, 2 ohmThe power supply of the device under test AC 300 V / 16 A, 50 / 60 Hz;
DC 300 V / 16 AMeasurement CRO voltage monitoring 10 Vp corresponds to 7,000 V CRO current monitoring 10 Vp corresponds to 3,500 A peak voltage 7,000 V, LCD display peak current 3,500 Amps, LCD display overcurrent protection When the inrush current exceeds the limit value, interrupt the inrush test
Differential mode limiter
Common mode limitertest program Quick Start Parameters can be adjusted online, simple and fast Standard Test Procedure According to IEC 61000-4-5, test level 1 - 4
according to EN 61000-6-1, -6-2
Manual setting of standard test proceduresuser testing program Change polarity after N pulses
Change coupling after N pulses
Change voltage after N pulses
Change phase angle after N pulsesPulse Magnetic Field Test Procedure Compliant with IEC 61000-4-9, test levels 100, 300 and 1,000 A/m Test levels are continuously adjustable in the quick start menu option CNV 504Nx 4-wire signal line/data line coupling network
according to IEC 61000-4-5 standard Ed 3.0CNV 508Nx 8-wire signal line/data line coupling network
according to IEC 61000-4-5 standard Ed 3.0CNI 508N2 Network Group Coupling/decoupling network and protection network group for unshielded and shielded high-speed communication line (Ethernet line) testing IMN 2 Impedance matching adapter for matching direct output to 2 ohm source impedance Voltage dips, short interruptions and voltage changes Voltage drop module PFS/N7 complies with EN/IEC 61000-4-11 and EN 61000-6-1, -6-2 standards Channel PF1 / PF2 AC Voltage: Up to 300 V
AC Current: Up to 16 Afrequency
16 Hz - 500 Hz switch off time < 5 us, 100 ohm resistive load electric shock > 500 A Protect Both channels are short-circuit protected trigger circuit trigger method Automatic, manual, external trigger Synchronize 0° - 360°, resolution 1° (16 - 500 Hz) repetition rate 10 ms - 9,999 s event duration 20 us - 9,999 s output CRO trigger Oscilloscope 5 V trigger signal DUT terminal L, N sum PE Measurement voltage monitoring Measure the voltage of the device under test, built-in 100:1 voltage divider current monitoring Measure EUT current 10 mV/A, 1,000 A maximum DUT voltage LCD display DUT current LCD display test program Quick Start Parameters can be adjusted online, simple and fast Standard Test Procedure Conforms to IEC 61000-4-11 standard, suitable for AC power supply test
Conforms to IEC 61000-4-29 standard, suitable for DC power supply test
Conforms to EN 61000-6-1, -6-2 standard
Manual setting standard test procedureuser testing program Control voltage change by external voltage regulator
Change phase angle after N events
Change event duration after N events
Inverting mode50 / 60 Hz magnetic field test Complies with IEC / EN 61000-4-8
with external current transformer MC 2630 for test classes 1, 3, 10 and 30 A / m with external current transformer MC 26100 for test classes 100, 300 and 1,000 A / moption In 4780 Transformer, fixed tap
conforming to IEC / EN 61000-4-11 Ed.2V 4780S2 Autotransformer with automatic tap change
according to IEC / EN 61000-4-11 Ed.2variac NX-1-260-16 Automatic voltage regulator (0 - 260 V, 16 A) MS 100N Field Coil, 1 mx 1 m MC 2630 Current transformers for magnetic field testing up to 30 A/m MC 26100 Current transformers for magnetic field testing up to 1,000 A/m CA PFS Inrush current calibration components comply with IEC 61000-4-11 standard CA PFS-100R 100 ohm low inductance load resistors for rise and fall time verification ringing wave Ring wave module RWG / N7 (option) complies with ANSI / IEEE C62.41 and EN / IEC 61000-4-12 standards Test voltage 200 V - 6,000 V ± 10%； Voltage Waveform (open circuit) First peak rise time tr 0.5 us ± 30% Oscillation frequency 100 kHz ± 10% attenuation Peak 2 - Peak 1 = 40 - 110%
Peak 3 - Peak 2 = 40 - 80%
Peak 4 - Peak 3 = 40 - 80%electric current Waveform (short circuit) rise time tr <= 1.0 us Oscillation frequency 100 kHz ± 10% source impedance 12 ohms and 30 ohms peak current Depends on selected source impedance polarity positive, negative Ring wave module RWG / N7.1 (option) complies with UL 244, UL 1741, ANSI / IEEE C62.41 and EN / IEC 61000-4-12 standards Test voltage 250 V - 6,000 V ± 10%； Voltage Waveform (open circuit) First peak rise time tr 0.5 us ± 30% Oscillation frequency 100 kHz ± 10% attenuation Peak 2 - Peak 1 = 40 - 110%
Peak 3 - Peak 2 = 40 - 80%
Peak 4 - Peak 3 = 40 - 80%electric current Waveform (short circuit) rise time tr <= 1.0 us Oscillation frequency 100 kHz ± 10% source impedance 12 ohm and 30 ohm and 50 ohm peak current Depends on selected source impedance polarity positive, negative trigger circuit trigger method Automatic, manual, external trigger Synchronize 0° - 360°, resolution 1° repetition rate Up to 1 Hz (1 s - 999 s) Measurement CRO voltage monitoring 10 Vp corresponds to 7,000 V CRO current monitoring 10 Vp corresponds to 3,500 A output CRO trigger Oscilloscope 5 V trigger signal direct output Via High Voltage Safety Lab Connectors Coupling method L, N, PE; line-line; line-ground The power supply of the device under test AC 300 V / 16 A, 50 / 60 Hz;
DC 300 V / 16 Atest program Quick Start Parameters can be adjusted online, simple and fast communication surge Communication surge module TSURGE7 open circuit voltage 250 V - 7,000 V ± 10% Energy storage capacitor 20 uF polarity positive, negative, alternating counter 1 - 30,000 or unlimited, optional ITU and ETSI standards Front time 10 us ± 30% Pulse duration 700 us ± 20% FCC part 68 standard pulse B Front time 9 us ± 30% Pulse duration 720 us ± 20% Output current 6 A - 175 A (short circuit) Rise Time 5 us ± 30% Pulse duration 320 us ± 20% IEC 61000-4-5 standard Rise Time 10 us ± 30% Pulse duration 700 us ± 20% Output current 6 A - 175 A (short circuit) Rise Time 5 us ± 20% Pulse duration 320 us ± 20% trigger circuit trigger method Automatic, manual, external trigger repetition rate Up to 0.33 Hz (3 s - 999 s) output ITU and ETSI standards 2 wires T1 and T2, each 25 ohm load FCC part 68 standard pulse B 2 wires T1 and T2, each 25 ohm load IEC 61000-4-5 standard 4 wires T1, T2, T3 and T4, each 25 ohm load For other test requirements, special output settings can be made option CNV 504T5 4-wire unshielded symmetrical line (communication line) coupling and decoupling network
according to IEC 61000-4-5 standard Ed 3.0 (fig. 10)CNV 508T5 8-wire unshielded symmetrical line (communication line) coupling and decoupling network
conforming to IEC 61000-4-5 standard Ed 3.0 (fig. 10)general data interface serial interface USB parallel interface IEEE 488, addresses 1 - 30 analog output External voltage regulator controlled by 0 - 10 V DC voltage analog signal Coupled network interface 15-pin SubD interface, control external coupling network failure detection Monitor the device under test through failure detection port 1 and failure detection port 2 Safety safety standard EN/IEC 61010 standard safety circuit Control input (24 V DC) Warning Light Floating contact (up to 230 V / 6 A) general data size and weight 19" /6 HU, about 29 kg supply voltage 115 / 230 V +10 / -15% power, frequency
,Approx. 75W, 50/60Hz fuse 2 x T 2 AT(230 V)或 2 X T 4 AT(115 V) Host comes with accessories host power cord Plug type depends on the country of use DUT power cord Plug type depends on the country of use EUT Adapter Socket type depends on the country of use Operation Manual Calibration certificate option CNI 503Bx Three-phase coupling/decoupling network up to 100 A per phase
Compliant with IEC 61000-4-4 and IEC 61000-4-5iec.control 1 Remote control and reporting software including standard test procedures and report generation. OptoLink Visual interface, 3m optical fiber, USB A connector, replaceable USB interface