OCS 500N6 Damped Oscillatory Wave Simulator-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

OCS 500N6 Damped Oscillatory Wave Simulator

Brand:

EM TEST

OCS 500N6 Damped Oscillatory Wave Simulator

Product Description
Main features
Technical parameters

- Commodity name: OCS 500N6 Damped Oscillatory Wave Simulator
- Commodity ID: 1064530711873736704
- 品牌11: EMTEST
- 行业: 民用
- 描述: OCS 500N6 - Combined Ringwave and Damped Oscillatory Wave Simulator
- 品牌: EM TEST
OCS 500N6 - Combined Ringwave and Damped Oscillatory Wave Simulator

The OCS 500N6.8 simulator can perform ring wave tests with a test voltage up to 6 kV in accordance with EN / IEC 61000-4-12; it can also perform oscillation frequency tests in accordance with EN / IEC 61000-4-18 Damped oscillatory wave tests at 100 kHz / 1 MHz with test voltages up to 3 kV.

Ringing waves are non-repetitive damped oscillatory transients that occur on low-voltage power, control, and signal lines in public and non-public power grids. Damped oscillatory waves are reproducible transient phenomena that mainly occur on power, control and signal lines installed in high and medium voltage substations.

Together with the magnetic field coil MS 100N, the OCS 500N6.8 can also perform oscillating magnetic field tests according to EN / IEC 61000-4-10.
main feature:

　　Discrete Test Equipment

　　Ring wave test up to 6 kV

　　Damped shock wave test up to 3 kV

　　Built-in single-phase or three-phase coupling/decoupling network up to 100 A

　　Front panel operation

　　Standard Test Procedure

　　USB and GPIB interface

Standards compliant:

　　ANSI/IEEE C37.90

　　ANSI/IEEE C62.41

　　IN 61000-4-10

　　IN 61000-4-12

　　IN 61000-4-18

　　IEC 60255-22-1

　　IEC 61000-4-10

　　IEC 61000-4-12

　　IEC 61000-4-18

　　IEC 61850-3

advantage:

　　The stand-alone test set OCS 500N6 completes EM TEST for IEC 61000-4-x standard tests. It can generate a 6 kV ringing wave that meets the ANSI/IEEE C62.41 standard; at the same time, it can also generate a 3 kV damped oscillation wave at a frequency of 100 kHz and 1 MHz, which not only complies with EN/IEC 61000-4 -18 standard and also meets the relevant requirements of ANSI / IEEE C39.70 standard for testing protective relays and relay systems.

　　Damped oscillating waves can also be used to generate damped oscillating magnetic fields required by the EN / IEC 61000-4-10 standard (in combination with field coils, eg MS 100). The OCS 500N6 has a built-in coupling/decoupling network for single-phase or three-phase testing, capable of delivering a rated current of 16 A or 32 A per line, respectively.

　　Through the front panel menu or the built-in USB, GPIB interface, OCS 500N6 can realize both manual operation and remote control. Its failure detection function allows the user to control the ongoing test sequence based on the state of the device under test. The monitoring output port (BNC) is used to measure and verify the signal. The OCS 500N6 also includes safety features such as safety lock and warning light control.

　　Pre-programmed standard test routines provide maximum user convenience. In addition, OCS 500N6 also provides a quick-start test program with online adjustable parameters to evaluate the sensitivity level of the device under test.

　　Through the front panel menu and function keys, users can quickly and accurately edit the test program. The control cursor is used to quickly control all test parameters of the programmed test program, which makes the test process very simple and ensures that each test step can be carried out correctly.

controlling software:

　　Control and report generation software iec.control

　　iec.control is a very user-friendly control software. It is easy to use, has a clear user interface structure and strong flexibility. Various operating functions and EM TEST standard information library allow users to easily complete custom test procedures. It can automatically identify the connected EM TEST test equipment and perform automatic configuration. Its powerful reporting function can help users generate test reports that meet international requirements.

　　iec.control supports Windows 7, Windows 8 (64Bit) and Windows 10 operating systems. Remote control is done via USB or GPIB interface. iec.control is compatible with various GPIB cards of National Instruments.

Accessory equipment:

　　CNV 504N5 - Signal/Data Line Coupling/Decoupling Networks

　　CNV 504N5 is a 4-wire coupling/decoupling network for coupling damped oscillatory waves onto signal/data lines with 200 ohm source impedance in accordance with EN / IEC 61000-4-18 standard requirements.

appendix:

　　MS 100N - Magnetic field coil for damped oscillating magnetic field testing

　　The MS 100N is a 1 m * 1 m magnetic field coil that complies with the requirements of the EN / IEC 61000-4-10 standard. The field coil is fixed on a movable, height-adjustable, and 360-degree rotatable stand.

　　Connect the MS 100N directly to the corresponding high-voltage output port of the OCS 500N6 to generate a damped oscillating magnetic field that meets the requirements of the EN / IEC 61000-4-10 standard, up to test level 5.

Specific indicators:

OCS 500N6 Series
OCS 500N6 model
OCS500N6.5	Built-in 250V/16A coupling and decoupling network
OCS500N6.6	Built-in 250V/32A coupling and decoupling network
OCS500N6.7	Built-in 3×440V/16A coupling and decoupling network
OCS500N6.8	Built-in 3×440V/32A coupling and decoupling network
OCS500N6.20	Built-in 3 x 690 V / 100 A coupling/decoupling networks
RCCB test corresponds to OCS 500N6 model
OCS500N6.17	Built-in 3×440V/32A coupling and decoupling network calibrated according to IEC 61008-1 and IEC 61009-1
Ring wave test in compliance with IEC61000-4-12 and ANSI/IEEC62.41 standards
open circuit voltage	250V—6000V+/-10%
Rise Time	0.5us+/-30%
Oscillation frequency	100kHz+/-10%
decay rate	Peak 2-Peak 1=0.4-1.1 Peak 3-Peak 2=0.4-0.8 Peak 4-Peak 3=0.4-0.8
source impedance	12 ohms and 30 ohms +/- 20%
Short circuit peak current	500A max at 12 ohms 200A max at 30 ohms (internal)
Rise Time	<1us
Oscillation frequency	100kHz+/-10%
polarity	positive/negative
repetition rate	1 / min or faster
Damped shock wave test in accordance with IEC61000-4-18
High voltage output open circuit voltage	250V—3000V+/-10%
Open circuit voltage at line output	250V—2500V+/-10%
Rise Time	75ns+/-20%
Oscillation frequency	100kHz and 1MHz+/-10%
attenuation	Peak 5 > 50% of peak 1 Peak 10 < 50% of peak 1
source impedance	200 ohms +/-20%
polarity	positive/negative
repetition rate	At 100kHz, up to 50/s; at 1M Hz, up to 500/s
Pulse duration	at least 2s
trigger circuit
release pulse	automatic, manual, external
Synchronize	0°-360°, resolution 1°
CRO trigger	Oscilloscope 5 V trigger signal
output
direct output	Via High Voltage Safety Lab Connectors
Coupling method	line-line; line-ground
Single-phase 16A DUT power supply	AC: 250V/16A, 50/60Hz DC: 250V/16A
Single-phase 32A DUT power supply	AC: 250V/32A, 50/60Hz DC: 250V/32A
Three-phase 16A DUT power supply	AC: 3×440V/16A, 50/60Hz DC: 250V/16A
Three-phase 32A DUT power supply	AC: 3×440V/32A, 50/60Hz DC: 250V/32A
Three-phase 100A DUT power supply	AC: 3 x 690 V / 100 A; 50 / 60 Hz DC: 250 V / 100 A
Measurement
ringing wave	LCD display peak voltage and peak current
test program
Quick start test program	Instant start, simple and fast
Standard Test Procedure	Conforms to IEC61000-4-12 Test Level 1-4 Manual Test Standard Test Procedure Conforms to ANSI / IEEC62.41 Standard Conforms to IEC61000-4-10 Test Level 1-5
User-Defined Test Program	Change the polarity after N pulses Change the coupling mode after N pulses Change the voltage after N pulses Change the phase angle after N pulses
interface
serial interface	USB
parallel interface	IEEE488, address 1-30
option
CNV 504N5.1	4-wire Signal Line/Data Line Coupling Network for 100kHz and 1MHz Damped Oscillator Tests per IEC 61000-4-18, 50 V / 4 A
CNV 504N5.3	4-wire Signal Line/Data Line Coupling Network for 100kHz and 1MHz Damped Oscillator Tests per IEC 61000-4-18, 250 V / 4 A
CNV 508N4	4-pair (8-wire) coupling network according to IEC 60255-26, 250 V / 4 A
CNV 508N4.1	4-pair (8-wire) coupling network according to IEC 60255-26, 250 V / 16 A
MS 100N	Magnetic field coil, 1 mx 1 m Field strengths up to 1000 A/m
iec.control	Remote control and reporting software including standard test procedures and report generation.
general data
size and weight	Single-phase 19''/6Hu, about 28kg; Three-phase 19''/6Hu, about 41kg
supply voltage	115/230V+10/-15%
fuse	2 x T 2 AT (230 V) ；2 x T 4 AT (115 V)