OCS 500N6F Fast and slow damped oscillatory and ringing wave simulator-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

OCS 500N6F Fast and slow damped oscillatory and ringing wave simulator

Brand:

EM TEST

OCS 500N6F Fast and slow damped oscillatory and ringing wave simulator

Product Description
Main features
Technical parameters

- Commodity name: OCS 500N6F Fast and slow damped oscillatory and ringing wave simulator
- Commodity ID: 1064529767752683520
- 品牌11: EMTEST
- 行业: 民用
- 描述: OCS 500N6F series simulators are capable of fast damped oscillatory wave testing with an oscillation frequency of 3 MHz / 10 MHz / 30 MHz and a test voltage up to 4.4 kV; it can also be extended to perform oscillations in accordance with the requirements
- 品牌: EM TEST
OCS 500N6F - Combined Fast/Slow Damped Oscillatory and Ringing Wave Test Set

OCS 500N6F series simulators are capable of fast damped oscillatory wave testing with an oscillation frequency of 3 MHz / 10 MHz / 30 MHz and a test voltage up to 4.4 kV; it can also be extended to perform oscillations in accordance with the requirements of the EN / IEC 61000-4-18 standard Frequency is 100 kHz / 1 MHz, slow damped oscillatory wave test with test voltage up to 3.0 kV; and ring wave test with test voltage up to 6.0 kV according to EN / IEC 61000-4-12 standard .

Damped oscillatory waves are repeatable transient phenomena that mainly occur on power lines, control lines, and signal lines installed in high-voltage and medium-voltage substations. They are divided into slow damped oscillatory waves and fast damped oscillatory waves. The ringing wave is a non-repetitive damped oscillatory transient phenomenon that occurs on low-voltage power lines, control lines, and signal lines in public and non-public power grids.
main feature:

　　Fully automatic integrated test system

　　Various pulse tests can be performed through a single DUT connection port

　　Fast damped oscillatory wave test voltage up to 4.4 kV

　　Slow damped oscillatory wave test voltage up to 3 kV (option)

　　Ring wave test voltage up to 6 kV (option)

　　Built-in coupling/decoupling network, single-phase and three-phase test voltage up to 32 A

　　Support front panel manual operation

　　USB and GPIB interface

Standards compliant:

　　ANSI/IEEE C37.90

　　ANSI/IEEE C62.41

　　IN 61000-4-10

　　IN 61000-4-12

　　IN 61000-4-18

　　IEC 60255-22-1

　　IEC 60255-26

　　IEC 61000-4-10

　　IEC 61000-4-12

　　IEC 61000-4-18

　　IEC 61000-6-5

　　IEC 61850-3

　　IEC 62052-11

advantage:

　　OCS 500N6F Series - 3-in-1 Combined Damped Shockwave and Ringwave Simulator

　　The basic configuration of the OCS 500N6F series is a fast damped oscillatory wave simulator complying with the IEC 61000-4-18 standard, the test voltage can reach 4.4 kV, and the oscillation frequencies are 3 MHz, 10 MHz and 30 MHz respectively. Different models of the OCS 500N6F series have built-in single-phase or three-phase coupling/decoupling networks respectively, and the rated current of each line is 16A or 32A.

Optional modules:

　　- The slow damped oscillatory wave module has a test voltage up to 3kV and an oscillation frequency of 100 kHz / 1 MHz. It complies with EN/IEC 61000-4-18 standard and meets the requirements of ANSI/IEEE C39.70 standard for testing protective relays.

　　- The test voltage of the ring wave module can reach 6 kV, which meets the requirements of IEC 61000-4-12 and ANSI/IEEE C62.41 standards.

　　Through the front panel menu and function keys, users can quickly and accurately edit the test program. The control cursor is used to quickly control all test parameters of the programmed test program, which makes the test process very simple and ensures that each test step can be carried out correctly.

controlling software:

　　Control and report generation software iec.control

　　iec.control is a very user-friendly control software. It is easy to use, has a clear user interface structure and strong flexibility. Various operating functions and EM TEST standard information library allow users to easily complete custom test procedures. It can automatically identify the connected EM TEST test equipment and perform automatic configuration. Its powerful reporting function can help users generate test reports that meet international requirements.

　　iec.control supports Windows 7, Windows 8 (64Bit) and Windows 10 operating systems. Remote control is done via USB or GPIB interface. iec.control is compatible with various GPIB cards of National Instruments.

　　

Accessory equipment:

　　CNV 504N5 - Signal/Data Line Coupling/Decoupling Networks

　　CNV 504N5 is a 4-wire coupling/decoupling network for coupling a slow damped oscillatory waveform with a frequency of 100 kHz or 1 MHz to signal/data lines in accordance with EN/IEC 61000-4-18 .

appendix:

　　MS 100N - Magnetic field coil for damped oscillating magnetic field testing

　　The MS 100N is a 1 m * 1 m magnetic field coil that complies with the requirements of the EN / IEC 61000-4-10 standard. The field coil is fixed on a movable, height-adjustable, and 360-degree rotatable stand.

　　Connect the MS 100N directly to the corresponding high voltage output port of the OCS 500N6F to generate a damped oscillating magnetic field that complies with the requirements of the EN / IEC 61000-4-10 standard, up to test level 5.

Specific indicators:

OCS 500N6F Series
OCS 500N6F Model
OCS500N6F	Built-in single-phase coupling and decoupling network AC 250V/16A; DC 250V/16A
OCS500N6F.1	Built-in single-phase coupling and decoupling network AC 250V/32A; DC 250V/32A
OCS500N6F.2	Built-in three-phase coupling and decoupling network AC 3×440V/16A; DC 250V/16A
OCS500N6F.3	Built-in three-phase coupling and decoupling network AC 3×440V/32A; DC 250V/32A
RCCB test corresponds to OCS 500N6F model
OCS500N6F.4	Built-in coupling and decoupling network AC3×440V/32A, DC250V/32A, calibrated according to IEC 61008-1 and IEC 61009-1
Ring wave test in compliance with IEC61000-4-12 and ANSI/IEEC62.41 standards
open circuit voltage	250V—6000V+/-10%
Rise Time	0.5us+/-30%
Oscillation frequency	100kHz+/-10%
decay rate	Peak 2-Peak 1=0.4-1.1 Peak 3-Peak 2=0.4-0.8 Peak 4-Peak 3=0.4-0.8
source impedance	12 ohms and 30 ohms +/- 20%
Short circuit peak current	500A max at 12 ohms 200A max at 30 ohms (internal)
Rise Time	<1us
Oscillation frequency	100kHz+/-10%
polarity	positive/negative
repetition rate	1 / min or faster
Fast damped oscillatory wave test according to IEC61000-4-18 standard
High voltage output open circuit voltage	450V—4400V+/-10%
Rise Time	5ns+/-30%
Oscillation frequency	3MHz、10MHz、30MHz+/-10%
attenuation	Peak 5 > 50% of peak 1 Peak 10 < 50% of peak 1
source impedance	50 ohms +/-20%
Coupling method	common mode
polarity	positive/negative
repetition rate	Up to 5,000 / s ± 10%
Pulse duration	50 ms ± 20% at 3 MHz 15 ms ± 20% at 10 MHz 5 ms ± 20% at 30 MHz
burst period	300 ms ± 20%
short circuit current	9 A - 88 A ± 20%
Current waveform rise time	< 330 ns at 3 MHz < 100 ns at 10 MHz < 33 ns at 30 MHz
decay (current)	Peak 5 > 25% of Peak 1 Peak 10 < 25% of Peak 1
Slow damped shock wave test according to IEC61000-4-18 standard (option)
High voltage output open circuit voltage	250V—3000V+/-10%
Open circuit voltage at the output of the coupling network	250V—2500V+/-10%
Rise Time	75ns+/-20%
Oscillation frequency	100kHz and 1MHz+/-10%
attenuation	Peak 5 > 50% of peak 1 Peak 10 < 50% of peak 1
source impedance	200 ohms +/-20%
polarity	positive/negative
repetition rate	At 100kHz, up to 50/s; at 1MHz, up to 500/s
Pulse duration	at least 2s
Ring wave waveform according to EN / IEC 61000-4-12 and ANSI / IEE C62.41 (option)
open circuit voltage	250V—6000V+/-10%
Rise Time	0.5us+/-30%
Oscillation frequency	100kHz+/-10%
attenuation	Peak 2 - Peak 1: 0.4 - 1.1 Peak 3 - Peak 2: 0.4 - 0.8 Peak 4 - Peak 3: 0.4 - 0.8
source impedance	12 ohms and 30 ohms ± 20%
Short circuit peak current	Internal: 500 A max at 12 ohm or 200 A max at 30 ohm
Rise Time	0.2 us to 1.0 us
Oscillation frequency	100kHz+/-10%
polarity	positive/negative
repetition rate	1 / min or faster
trigger circuit
release pulse	automatic, manual, external
Synchronize	0°-360°, resolution 1°
CRO trigger	Oscilloscope 5 V trigger signal
output
direct output	Via High Voltage Safety Lab Connectors
Coupling method	line-line; line-ground
OCS500N6F	AC: 250V/16A, 50/60Hz DC: 250V/16A
OCS500N6F.1	AC: 250V/32A, 50/60Hz DC: 250V/32A
OCS500N6F.2	AC: 3×440V/16A, 50/60Hz DC: 250V/16A
OCS500N6F.3	AC: 3×440V/32A, 50/60Hz DC: 250V/32A
OCS500N6F.4	AC: 3×440V/32A, 50/60Hz DC: 250V/32A
Measurement
ringing wave	LCD display peak voltage and peak current
test program
Quick start test program	Instant start, simple and fast
Standard Test Procedure	Compliant with IEC 61000-4-18 Compliant with IEC61000-4-12 Test Level 1-4 Manual Test Standard Test Procedure Compliant with ANSI/IEEC62.41 Compliant with IEC61000-4-10 Test Level 1-5
User-Defined Test Program	Change the polarity after N pulses Change the coupling mode after N pulses Change the voltage after N pulses Change the phase angle after N pulses
interface
serial interface	Optical link, 3 m cable, USB Type A connector
parallel interface	IEEE488, address 1-30
option
CNV 504N5.1	4-wire Signal Line/Data Line Coupling Network for 100kHz and 1MHz Damped Oscillator Tests per IEC 61000-4-18, 50 V / 4 A
CNV 504N5.3	4-wire Signal Line/Data Line Coupling Network for 100kHz and 1MHz Damped Oscillator Tests per IEC 61000-4-18, 250 V / 4 A
CNV 508N4	4-pair (8-wire) coupling network according to IEC 60255-26, 250 V / 4 A
CNV 508N4.1	4-pair (8-wire) coupling network according to IEC 60255-26, 250 V / 16 A
MS 100N	Field coils to EN/IEC 61000-4-10
iec.control	Remote control and reporting software including standard test procedures and report generation.
CA OCS F Kit	Load resistor assembly KW0R1 for fast damped oscillation waveform verification is 0.1 ohm load resistor KW1000 is 1000ohm load resistor CA MC F adapter is used to match KW 0R1 and KW 1000 to the power supply output port of OCS 500N6F
S-DOW/N6F	100kHz and 1MHz Slow Damped Oscillator Expansion Module, Compliant with IEC 61000-4-18
RWG/N6F	6kV ring wave extension module, compliant with IEC 61000-4-12 and ANSI/IEEE C62.41
general data
size and weight	Single-phase 19''/9Hu, about 32kg; Three-phase 19''/9Hu, about 50kg
supply voltage	115/230V+10/-15%
fuse	2 x T 2 AT (230 V) ；2 x T 4 AT (115 V)