EFT 500N5 Series Electrical Fast Transient Burst Simulator-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

EFT 500N5 Series Electrical Fast Transient Burst Simulator

Brand:

EM TEST

EFT 500N5 Series Electrical Fast Transient Burst Simulator

Product Description
Main features
Technical parameters

- Commodity name: EFT 500N5 Series Electrical Fast Transient Burst Simulator
- Commodity ID: 1064522182249041920
- 品牌11: EMTEST
- 行业: 民用
- 描述: The EFT 500N5 Series is state-of-the-art EFT/Burst test equipment with built-in coupling/decoupling networks for single-phase or three-phase power supply systems and high voltage terminals for connection to capacitive coupling clamps. Spike frequencies ra
- 品牌: EM TEST
　　The EFT 500N5 Series is state-of-the-art EFT/Burst test equipment with built-in coupling/decoupling networks for single-phase or three-phase power supply systems and high voltage terminals for connection to capacitive coupling clamps. Spike frequencies range from 100 Hz to 1,000 kHz.

　　The EFT 500N5 can generate 10,000 transients per second, or 1,000 transients per burst. Its performance fully meets the requirements of IEC 61000-4-4:2012 (Ed.3). Pre-programmed standard test routines and several optional user test routines make the EFT 500N5 the best discrete test equipment for testing products under test or semi-assembled products during final test.
main feature:

　　The lightest combo simulator with a 7" touchscreen

　　Built-in burst test module (5.5 kV), surge test module (5.0 kV) and voltage drop test module

　　Built-in single-phase coupling/decoupling network up to 400 V / 32 A

　　Front panel manual operation, simple and convenient

　　The start button and stop button have LED indicators to show the test status

　　With peak voltage and peak current monitoring output port

　　With fiber optic interface and Ethernet interface for remote control

　　Can control external three-phase coupling network

　　Voltage drop test module complies with IEC / EN 61000-4-8 / -11 / -29 standards (DC)

　　With failure detection function

Standards compliant:

　　ANSI/IEEE C62.41

　　EN 61000-4-4

　　EN 61000-6-1

　　EN 61000-6-2

　　IEC 60601-1-2

　　IEC 61000-4-4

　　IEC 61326

　　IEC 61850-3

advantage:

　　EFT 500N5 - Electrical Fast Transient Burst Test Equipment Beyond Standard Requirements

　　As we all know, EFT 500N5's peak pulse frequency and burst duration can be adjusted in a wide range, and can meet the coaxial 50 ohm load output waveform and the common mode operation of the DUT port at the same time. The EFT 500N5 is a true fully compliant EFT/Burst test device.

　　EFT 500N5 has a variety of models, through the built-in single-phase or three-phase coupling network, it can meet the test of the equipment under test with a rated current up to 50 A. EFT 500N5 can also be integrated into a complete test system, and connected to a common coupling/decoupling network through the relevant control interface, so as to cooperate with other EM TEST 500 series products.

　　Through the front panel menu and function keys, users can quickly and accurately edit the test program. The control cursor is used to quickly control all test parameters of the programmed test program, which makes the test process very simple and ensures that each test step can be carried out correctly.

controlling software:

　　Control and report generation software iec.control

　　iec.control is a very user-friendly control software. It is easy to use, has a clear user interface structure and strong flexibility. Various operating functions and EM TEST standard information library allow users to easily complete custom test procedures. It can automatically identify the connected EM TEST test equipment and perform automatic configuration. Its powerful reporting function can help users generate test reports that meet international requirements.

　　iec.control supports Windows 7, Windows 8 (64Bit) and Windows 10 operating systems. Remote control is done via USB or GPIB interface. iec.control is compatible with various GPIB cards of National Instruments.

appendix:

　　ITP - Immunity Test Probe Assembly

　　ITP is a product development diagnostic test tool. It includes a variety of near-field probes that can locate weak points in a system or on a printed circuit board. A burst simulator is used to generate interference signals.

　　CA EFT kit - Electrical Fast Transient/Burst Calibration Kit

　　According to the requirements of the IEC 61000-4-4 Ed.2 standard, the characteristics of the burst generator are verified by two different loads of 50 ohm and 1,000 ohm. EM TEST provides users with calibration components including these two load resistors and an adapter to verify the output port of the device under test.

　　HFK - Capacitive coupling clamp

　　HFK capacitive coupling clamps fully meet the requirements of the IEC / EN 61000-4-4 standard.

Specific indicators:

EFT 500N model
EFT 500N5.1	Built-in three-phase coupling network, AC: 3x 440V/32A DC: 270 V / 32 A
EFT 500N5.2	Built-in three-phase coupling network, AC: 3x 440V/50A DC: 270 V / 50 A
EFT 500N5.5	Built-in single-phase coupling network, AC: 250V/32A DC: 270 V / 32 A
EFT 500N5.8	Built-in three-phase coupling network, AC: 3x 690V/32A DC: 270 V / 32 A
test level
voltage range	200V - 4,800V
50 ohm load	100V - 2,400V
Pulse waveform	50ohm load
rise time tr	5ns ± 30%
Pulse width td	50ns ± 30%
Pulse waveform	1,000ohm load
rise time tr	5ns ± 30%
Pulse width td	35ns - 150ns
source impedance	50 ohm ± 20%
polarity	positive/negative
trigger
release burst	Automatic, manual, external start
Burst Width	Td = 0.1ms - 999.9ms
Burst repetition rate	Tr = 10ms - 9,999ms
pulse repetition rate	f = 0.1kHz - 1,000kHz
test duration	T = 0:01 min - 99:59 min T > 99:59 min - infinite
output
direct output	Via high voltage coaxial connector
Coupling method	L, N, PE and various combinations
DUT AC power supply 50/60Hz	Single phase: 250 V / 32 A Three phase: 3 x 440 V / 32 A or 50 A
DUT DC power supply	270 V / 32 A or 50 A
DUT power supply	Other DUT supply voltage can be customized
CRO trigger	Oscilloscope 15V trigger signal pulse group duration and pulse frequency can be checked
test program
Quick Start	Instant start, simple and fast
user testing program	User-Defined Test Program Change the voltage after T time Change frequency after T time Frequency sweep within monoburst T Time enough to change burst width Random burst output Synchronized burst output T Time enough to change polarity
Standard Test Procedure	Complies with IEC 61000-4-4 standard test level Automatic Test Level X - Y
Serve	Service, Setup, Self-Test
interface
serial interface	USB
parallel interface	IEEE 488, addresses 1 - 30
Coupled network interface	Control external coupling network CNI 503
general data
size and weight	EFT 500N5.1: 19"/6HU, 22kg EFT 500N5.2: 19"/6HU, 40kg EFT 500N5.5: 19"/3HU, 20kg EFT 500N5.8: 19"/3HU, 23kg
supply voltage	115/230V, +10/-15%
fuse	2 x T 2AT (230V); 2 x T 4AT (115V)
Environmental requirements
temperature	10 °C -35 °C
Relative humidity	25 % - 75 %, non-condensing
atmospheric pressure	86 kPa - 106 kPa
option
HFC	Capacitive coupling clamp according to IEC 61000-4-4
KW 50	50 ohm matching resistors for waveform verification
KW 1000	1000 ohm matched resistors for waveform verification
CA EFT kit	Burst calibration kit including KW50, KW1000, DUT port adapter and carrying case
CA HFC kit	Capacitive coupling clamp calibration adapter kit, consisting of - sensor board: conforming to IEC / EN 61000-4-4 standard Ed 3.0 - support accessory: fixes the KW 50 adapter at the same 100 mm height as the capacitive coupling clamp
A6dB	6dB attenuator
CNI 503	Three-phase coupling/decoupling network, 3x440V/32A-63A-100A
iec.control remote control software	Remote control and reporting software including standard test procedures and report generation.