OSM 303-304-305 Optical drive module-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

OSM 303-304-305 Optical drive module

Brand:

TESEO

Product Description
Main features
Technical parameters

- Commodity name: OSM 303-304-305 Optical drive module
- Commodity ID: 1064748326932074496
- 品牌11: TESEO
- 描述: The OSM303 and OSM304 systems enable remote operation of low and high power relays as well as different devices (DC motors, linear drivers, etc.)
- 品牌: TESEO
　　The OSM303 and OSM304 systems can remotely actuate low power, high power relays as well as various other devices (DC motors, linear actuators, etc.). The optical excitation module for conversion and linear excitation consists of the following items: a basic plug-in with two independent optical channels installed in the MOCS host, an optical fiber for the plug-in channel to transmit commands, and 1/2 shielded remote accessories Items, batteries for power supply, dedicated battery chargers.

　　The conversion and excitation plug-in of OSM series realizes the conversion and various excitations of optical fiber remote control low power and high power lines. They provide researchers and engineers with a comprehensive technical solution to control and remotely manage EUT functions without worrying about emission and susceptibility testing. Perform tasks safely in environments with strong electromagnetic fields or high voltages.

　　base unit plugin

　　Different plugins are available and control different appendages. General features:

　　Two independent optical channels control two different appendages using two different stimuli.

　　Manual and/or remote excitation from the front panel and/or RS232GPIB interface.

　　Fixed or instantaneous switching for different excitation

　　Incentive status is displayed in plugin panel

　　Fiber link 200 meters

　　The OSM03P is a universal module that can control an OSM303S appendage with 2x 1 A 50 V relays, an OSM304S appendage with 2x 30A 50V relays, an OSM05S appendage with 1 linear actuator and other OSM series in the future.

　　The OSM04P plug-in is a dedicated module for vehicle ignition control (start, acceleration, deceleration, etc.) that provides all functions of the ignition switch and accelerator. Usually it uses OSM304S and OSM305S appendages.

　　Accessory unit

　　OSM303S: Low Power Relay Accessory Unit

　　The small size, battery-operated accessory unit OSM303S can be placed close to the switching point or in hard-to-reach areas (e.g. engines, industrial equipment). It provides 2 optical fibers for control switching, and the maximum load of the contacts is 1 A, 50 V. The electromagnetic field strength OSM303S can withstand exceeds 200 V/m and the frequency range is 10 kHz to 18 GHz. It works in an extremely wide range of environments without major changes in performance.

　　It can work continuously for more than eight hours and charge for about 14 hours with the accessory battery charger.

　　OSM304S: High Power Relay Accessory Unit

　　The OSM304S provides 2 control fibers, the maximum load of the normally open contact is 30 A, 50 V. The electromagnetic field strength OSM304S can withstand exceeds 200 V/m and the frequency range is 10 kHz to 18 GHz. It works in an extremely wide environmental range without major changes in performance. It uses an external power source similar to a car battery.

　　OSM305S: Linear Excitation Attachment Module

　　The OSM305S provides 1 optical fiber to control the linear excitation, and performs a linear movement of the pole in two directions.

　　Mobile features:

　　Total movement: at least 150 mm

　　Maximum force: 10 kg

　　Incentive time: 10 s all move

　　The electromagnetic field strength OSM305S can withstand exceeds 200 V/m and the frequency range is 10 kHz to 18 GHz. It works in an extremely wide range of environments without major changes in performance. It can work continuously for more than eight hours (0.5 hours of continuous work), and can be charged with an accessory battery charger in a short time.

　　system components

　　OSM303P: A two-channel universal plug-in for AFOM-MF and IMAGE-MF

　　OSM304P: A dedicated plug-in for the two-channel ignition switch and pedal of AFOM-MF and IMAGE-MF

　　OSM303S: Accessory unit with two switching low power relays

　　CB4: dedicated battery charger

　　OSM304S: has two normally open high power relay appendage units

　　AL3: external power supply

　　OSM305S: Linear Excitation Accessory Unit

　　CB2: dedicated battery charger

　　FCmmm: optical cable (mmm=length meter)

　　FOBCST: ST optical cable feedthrough (option)

　　FORF: Optical cable reel rack (option)

　　application

　　Typically used for low power or high power conversion

　　Typically used for linear or cyclic excitation

　　Simulate the ignition switch and accelerator pedal of a ground vehicle

　　Simulation of continuous and instantaneous switching, linear and cyclic excitations in EMC testing of ships and aircraft
　　Two-channel plug-in for MOCS host

　　Remote management of low power relays, high power relays, linear actuators via fiber optic links

　　Full manual or RS232GPIB management of all functions

　　Shield >200 V/m electromagnetic field 10 kHz～18 GHz

OSM303P : Universal Controller
SlotBus compatible (MOCS host), control OSM303S, OSM304S, OSM305S, 2 different appendages control, 2 excitations per appendage (fixed or momentary), manual or RS232GPIB control function, panel display channel status and remote control
optical connector	ST
Operating temperature	0°C～+50°C
Storage temperature	-20°C～+70°C
OSM303S : Low Power Relay Accessory Module
Controlled by OSM303P or OSM304P, 2 reversing relays, contacts 1 A 50
optical connector	ST
electrical connector	6 x 1pole 2mm mini-jack plugs
battery charger connector	LEMO 5 poles round
battery working time	8 hours
battery charging time	16 hours
Operating temperature	0°C～+50°C
Storage temperature	-20°C～+70°C
size	122 x 79 x 30 mm ( case only)
weight	330 g
OSM304P : Ignition switch and pedal controller
SlotBus compatible (MOCS host), control OSM303S, OSM304S, OSM305S , 2 different appendages control, 2 excitations per appendage (fixed or momentary), manual or RS232GPIB control function, panel display channel status and remote control
optical connector	ST
Operating temperature	0°C～+50°C
Storage temperature	-20°C～+70°C
OSM304S : High Power Relay Accessory Module
Controlled by OSM303P or OSM304P, 2 NO relays, contacts 30 A 50 V
optical connector	ST
electrical connector	Type5 HE301B/MIL C-26482
External power connector	LEMO 2 poles polarized
Operating temperature	0°C～+50°C
Storage temperature	-20°C～+70°C
size	135 x 79 x 69 ( case only)
weight	860 g
OSM305S : Linear Excitation Accessory Module
Controlled by OSM303P or OSM304P, over range protection
total movement	150 mm
maximum strength	10 kg
total travel time	10 s
optical connector	ST
battery charger connector	circular LEMO 5 poles
battery autonomy	8 hours (20% duty cycle)
battery charging time	2 hours
Operating temperature	0°C～+50°C
Storage temperature	-20°C～+70°C
size	443 x 113 x 72 ( case only)
weight	2500 g