TES1000 electric field sensor-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

TES1000 electric field sensor

Brand:

TESEO

Product Description
Main features
Technical parameters

- Commodity name: TES1000 electric field sensor
- Commodity ID: 1064749784716955648
- 品牌11: TESEO
- 描述: The TES1000 can perform accurate measurement and frequency differentiation in one go
- 品牌: TESEO
　　High field strengths in the vicinity of radio, television or mobile phone base stations are generally measured with broadband field strength probes. Due to the inaccuracy of the equipment and the limitation of distinguishing between different signal sources, it is also necessary to integrate equipment such as traditional antennas, double ridge antennas, dipole antennas or log periodic antennas for testing. Corresponding to the vertical part of the human body and the repeatability of the test due to the limitation of the antenna size, the generated field strength is uneven, which is the disadvantage of the broadband field strength probe. The TES1000 can complete accurate measurement and frequency distinction at one time. Compared with the broadband probe, the TES1000 has a larger volume and is connected to the receiving device with an optical fiber cable. The probe of the TES1000 makes uniaxial measurements, and the three-position mechanical adapter of a standard dielectric tripod helps the probe to measure in three orthogonal directions. By connecting the analyzer to PC software, different field strengths can be obtained from various locations and the total field strength can be calculated.

　　The TES1000 electric field sensor has a wide frequency range, and the frequency is optional. Originally designed for military pulse testing, it was gradually improved into a test product for the electric field of radio frequency sensors. Mainly used in the field of health and safety, to obtain the electric field outdoors. Another application is the screening effect test of enclosures or small conductive enclosures.

　　system components

　　TES1000S: Field Strength Sensor

　　FD010: 10m fiber optic cable

　　TES1000R-B: optional sensor

　　CB2: TES1000R-B battery charger

　　option

　　CB6: Rechargeable battery charger

　　FDxxx: fiber optic cable length xxx meters

　　SUD3: Dielectric three-way support tripod

　　CAV-SMA-N-20: 20cm coaxial cable connecting spectrum analyzer and TES1000R

　　TES10000S-xxxV: Modification of standard frequency range

　　VAL: box

　　WIN-MF: Remote PC operation software for the analyzer (Italian)

General parameters
bandwidth	3dB，100kHz～1GHz
flatness	±2dB
Maximum field strength	200V/m
full scale range	300V/m
linear	±0.5dB
noise floor	100kHz～1MHz
TES1000S
power supply	9V battery powered, PP3 type
operating time	8 consecutive hours
optional connector	FC , 9um, fiber optic
size	65 ×65×103mm
weight	380g
temperature range	0 ℃～40℃
Mechanical I/F	1/4 inch, 20UNC
TES1000R-B
power supply	Rechargeable Battery
operating time	8 consecutive hours
charging time	2 hours
output impedance	50 ohms
output full scale	-6dBm
output connector	SMA （f）
optional connector	FC
weight	1000g
size	89 ×190×69mm
temperature range	0°C~40°C