Wisdom
-
-
-
-
EMC Test System For Civil Products
-
- Electrostatic Discharge Immunity
- Radiated, radio-frequency,electromagnetic field immunity
- Electrical Fast Transient Burst Immunity
- Surge immunity
- Immunity To Conducted Disturbance Induced by Radio Frequency Field
- Power Frequency Magnetic Field Immunity
- Voltage dips, short interruptions and voltage variations immunity
- Harmonics and interharmonics including mains signalling at AC power port, low frequency immunity
- Voltage Fluctuation Immunity Test
- Common mode disturbances in the frequency range 0 Hz to 150 kHz Immunity
- Ripple on DC input power port immunity
- Three-phase Voltage Unbalance Immunity Test
- Power Frequency Variation Immunity Test
- Oscillatory Wave Immunity Test
- Damped Oscillatory Magnetic Field Immunity Test
- Differential mode disturbances immunity test
- DC power input port voltage dip, short interruption and voltage variations test
-
Automotive Electronic EMC Test System
-
- Electrostatic Discharge Immunity
- Electrical Transient Conducted Immunity
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Anechoic Chamber Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Transverse Wave (TEM) Cell Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-large Current injection (BCI) method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Stripline Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-direct Injection Of Radio Frequency (RF) Power
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Magnetic Field Immunity Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Portable Transmitter Simulation Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Conduction Immunity Method For Extended Audio Range
- High Voltage Electrical Performance ISO 21498-2 Test System
- High Voltage Transient Conducted Immunity (ISO 7637-4)
-
-
- CE101(25Hz ~ 10kHz power line conduction emission)
- CE102(10kHz ~ 10MHz power line conduction emission)
- CE106(10kHz ~ 40GHz antenna port conducted emission)
- CE107 (Power Line Spike (Time Domain) Conducted Emission)
- RE101(25Hz ~ 100kHz magnetic field radiation emission)
- RE102(10kHz ~ 18GHz electric field radiation emission)
- RE103(10kHz ~ 40GHz antenna harmonic and spurious output radiated emission)
-
- CS101(25Hz ~ 150kHz power line conduction sensitivity)
- CS102(25Hz ~ 50kHz ground wire conduction sensitivity)
- CS103(15kHz ~ 10GHz Antenna Port Intermodulation Conducted Sensitivity)
- CS104(25Hz ~ 20GHz antenna port unwanted signal suppression conduction sensitivity)
- CS105(25Hz ~ 20GHz antenna port intermodulation conduction sensitivity)
- CS106 (Power Line Spike Signal Conduction Sensitivity)
- CS109(50Hz ~ 100kHz shell current conduction sensitivity)
- CS112 (Electrostatic Discharge Sensitivity)
- CS114(4kHz ~ 400MHz cable bundle injection conduction sensitivity)
- CS115 (Conduction sensitivity of cable bundle injection pulse excitation)
- CS116(10kHz to 100MHz Cable and Power Line Damped Sinusoidal Transient Conduction Sensitivity)
- RS101(25Hz ~ 100kHz magnetic field radiation sensitivity)
- RS103(10kHz ~ 40GHz electric field radiation sensitivity)
- RS105 (Transient Electromagnetic Field Radiated Susceptibility)
-
-
-
-
-
-
-
-
-
-
EMC Test System For Civil Products
-
- Electrostatic Discharge Immunity
- Radiated, radio-frequency,electromagnetic field immunity
- Electrical Fast Transient Burst Immunity
- Surge immunity
- Immunity To Conducted Disturbance Induced by Radio Frequency Field
- Power Frequency Magnetic Field Immunity
- Voltage dips, short interruptions and voltage variations immunity
- Harmonics and interharmonics including mains signalling at AC power port, low frequency immunity
- Voltage Fluctuation Immunity Test
- Common mode disturbances in the frequency range 0 Hz to 150 kHz Immunity
- Ripple on DC input power port immunity
- Three-phase Voltage Unbalance Immunity Test
- Power Frequency Variation Immunity Test
- Oscillatory Wave Immunity Test
- Damped Oscillatory Magnetic Field Immunity Test
- Differential mode disturbances immunity test
- DC power input port voltage dip, short interruption and voltage variations test
-
Automotive Electronic EMC Test System
-
- Electrostatic Discharge Immunity
- Electrical Transient Conducted Immunity
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Anechoic Chamber Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Transverse Wave (TEM) Cell Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-large Current injection (BCI) method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Stripline Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-direct Injection Of Radio Frequency (RF) Power
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Magnetic Field Immunity Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Portable Transmitter Simulation Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Conduction Immunity Method For Extended Audio Range
- High Voltage Electrical Performance ISO 21498-2 Test System
- High Voltage Transient Conducted Immunity (ISO 7637-4)
-
-
- CE101(25Hz ~ 10kHz power line conduction emission)
- CE102(10kHz ~ 10MHz power line conduction emission)
- CE106(10kHz ~ 40GHz antenna port conducted emission)
- CE107 (Power Line Spike (Time Domain) Conducted Emission)
- RE101(25Hz ~ 100kHz magnetic field radiation emission)
- RE102(10kHz ~ 18GHz electric field radiation emission)
- RE103(10kHz ~ 40GHz antenna harmonic and spurious output radiated emission)
-
- CS101(25Hz ~ 150kHz power line conduction sensitivity)
- CS102(25Hz ~ 50kHz ground wire conduction sensitivity)
- CS103(15kHz ~ 10GHz Antenna Port Intermodulation Conducted Sensitivity)
- CS104(25Hz ~ 20GHz antenna port unwanted signal suppression conduction sensitivity)
- CS105(25Hz ~ 20GHz antenna port intermodulation conduction sensitivity)
- CS106 (Power Line Spike Signal Conduction Sensitivity)
- CS109(50Hz ~ 100kHz shell current conduction sensitivity)
- CS112 (Electrostatic Discharge Sensitivity)
- CS114(4kHz ~ 400MHz cable bundle injection conduction sensitivity)
- CS115 (Conduction sensitivity of cable bundle injection pulse excitation)
- CS116(10kHz to 100MHz Cable and Power Line Damped Sinusoidal Transient Conduction Sensitivity)
- RS101(25Hz ~ 100kHz magnetic field radiation sensitivity)
- RS103(10kHz ~ 40GHz electric field radiation sensitivity)
- RS105 (Transient Electromagnetic Field Radiated Susceptibility)
-
-
-
-
-
-
Product
EMC Testing Solution Provider
V-LISN V-AMN calibration adapter
Brand:
SCHWARZBECK
- Product Description
- Main features
- Technical parameters
-
- Commodity name: V-LISN V-AMN calibration adapter
- Commodity ID: 1064754778484658176
- 品牌11: SCHWARZBECK
- 描述: The application procedure for V-LISN the V-AMN calibration adapter is described in CISPR 16-1-2.
- 品牌: SCHWARZBECK
The application of the V-LISN V-AMN calibration adapter is described in CISPR 16-1-2.
-
main feature:
The application of the V-LISN V-AMN calibration adapter is described in CISPR 16-1-2.
-
model
describe
THE 8127
BNC female to Schuko male. Suitable for all LISN models with Schuko socket. For example NSLK 8127, NSLK 8126, NSLK 8128, R&S ESH3-Z5, ENV216
ON 8127 female
BNC female to Schuko female. Suitable for all LISN models with Schuko head. For example NSLK 8127, R&S ESH3-Z5, ENV216
THE 8126
BNC female to CEE / CEKON 16 A male. Suitable for all LISN with 16 A three-phase socket such as NSLK 8126. Diameter of phase/neutral plug: 5 mm. Diameter of earth plug: 6,9 mm.
ON 8126 female
BNC female to CEE / CEKON 16 A female. Suitable for all LISNs with 16 A three-phase CEE /CEKON plugs, such as NSLK 8126. Phase/neutral plug inner diameter: 5mm. Earth plug inner diameter: 6,9 mm.
THE 8128
BNC female to CEE / CEKON 32 A male. Suitable for all LISNs with 32 A CEE / CEKON three-phase sockets such as NSLK 8128,R&S ENV432. Phase/Neutral plug diameter: 5,9 mm. Earth plug diameter: 8 mm.
ON 8128 female
BNC female to CEE / CEKON 32 A female. Suitable for all LISNs with 32 A three-phase CEE / CEKON plugs, such as NSLK 8128, R&S ENV432. Inner diameter of phase/neutral plug: 5,9 mm. Inner diameter of ground plug: 8 mm
THE 8163
BNC female to CEE / CEKON 63 A male. Suitable for all LISN with 63 A three-phase socket, such as NSLK8163. Diameter of phase/neutral plug: 8 mm. Diameter of earth plug: 10 mm
IN 8163 female
BNC female to CEE / CEKON 63 A female. Suitable for all LISN with 63 A three-phase CEE / CEKON plug, eg NSLK 8163. Inner diameter of phase/neutral plug: 8 mm. Inner diameter of ground plug: 10 mm
THE 8121
BNC female to 4 mm banana head. Fits NNLK 8121, NSLK 8122 and NDTV 8160.
THE 8129
BNC female to 4 mm banana head. Fits NNLK 8129.
THE 8130
BNC female to 4 mm banana head. Fits NNLK 8130,NNBL 8230, NNBL 8240 and NNLK 8140.
THE 8125
BNC female to wing terminal. Suitable for NNBM 8124, NNBM8125, NNBM 8126 A, NNBM 8125 BCI and NNBL 8225,NNHV 8123, NPLC 8500. Contact diameter: 8,5 mm, Contact distance: 60 mm
THE 8126 D
BNC FEMALE to wing terminals. Suitable for NNBM 8126 D, NNBL8226-HV, Nnbl 8226, Nnbl 8226-2, NNBM 8125 BCI with Option 200 A, NNBM 8124-200, NNBM 8126 G, NNHV 8123-200. ,5 mm, terminal distance: 90mm
THE 8126 F
BNC female to wing terminal. Fits NNBM 8126 E, NNBM8126 F, NNBM 8126 F HYB up to S/N 148. Terminal diameter: 12,4 mm, Terminal distance: 90 mm
KA 8126 F HUB
BNC female to wing terminal. Suitable for NNBM 8124-400,NNBM 8124-800, NNBL 8229 HV, NNBM 8126 F HYB starting from S/N 149, NNHV 8123-400. Terminal diameter: 16,4 mm, Terminal distance: 110 mm
MSS 9630
The braided current blocks the cable to avoid coupling effects caused by the braided current. Standard configuration: N-external thread, N-internal thread, length about 0.2-0.3 m. isolation measurements are required.
AND 8127 NEMA
BNC female to NEMA male. Fits all LISN models with NEMA receptacle.