Magnetic field testing system MTS-800 DC-250KHz-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

Magnetic field testing system MTS-800 DC-250KHz

Brand:

FRANKONIA

Magnetic field testing system MTS-800 DC-250KHz

Product Description
Main features
Technical parameters

- Commodity name: Magnetic field testing system MTS-800 DC-250KHz
- Commodity ID: 1064838388009029632
- 描述: MTS800 is a compact testing system suitable for magnetic field testing and broadband generators. Its built-in components can automatically perform EMC testing, meeting various automotive electronic standards and generating high magnetic field strength req
- 品牌: FRANKONIA
　　The MTS800 is a compact test system for magnetic field testing and broadband generators. Its built-in components can automatically perform EMC tests, meet various automotive electronic standards, and generate high magnetic field strengths required by tests.

　　With the use of triaxial Helmholtz coils, the sensitivity test of magnetic fields up to 1000A/m can be automatically performed at DC-1kHz frequency. Low field strengths can be generated up to 250kHz. Use with triaxial coils improves the operability of the device, so there is no need to constantly invert the DUT during testing.

　　MTS800 meets the requirements of all relevant EMC and military standards. Test and measurement are program controlled and most test parameters are set automatically. As with any standard, the MTS800 software package contains test limits, but different values can also be defined by the user.

　　After testing, a test report will be automatically generated. Report layouts and formats are preset, and user-defined layouts are also available. An automatic calibration procedure guarantees efficient performance of the MTS800.
　　Frequency range for emission and susceptibility measurements: DC – 250 kHz

　　Integrated 800W precision power amplifier, signal source and low frequency receiver

　　All devices are available as standalone devices

　　Powerful and easy-to-use operating software, adapted to future standards

　　Standardized software, report generation, integration of external measuring devices for EUT monitoring

　　Allows connection of an external multimeter that controls the EUT

　　Fully automatic test using a three-axis Helmholtz coil, software control to generate magnetic fields in three directions of x/y/z, without rotating the EUT.

　　Wide range of test accessories available

Voltage input (receiver)
Frequency Range:	DC - 250 kHz
input resistance:	1MΩ / 50 Ω
Connector:	XLR, unbalanced
Maximum input voltage:	100V continuous, 10V (50 ohms)
Gain:	-20/0/20/40 dB preamplifier, 0/20/40 dB ADC amplifier
current input
Frequency Range:	DC - 250 kHz
Diversion:	10mΩ / 1Ω / 100Ω
Maximum input current:	20A continuous (overload protected), 1 ohm shunt, protected by an additional 1.5A fuse
Connector:	4mm safety jack
Measuring range:	20 A, 10 A, 1 A, 100 mA, 10 mA, 1mA with automatic bias and gain
AD converter
Resolution:	16Bit
Sampling Rate:	1.25MSPS
Aliasing filter	0.01dB Tschebyscheff filter, fg = 260 kHz, filter off
generator
Frequency Range:	DC - 250 kHz
Output Impedance:	50 Ω
Connector:	BNC, unbalanced
Signal:	Sine wave/square wave/triangular wave/DC
amplitude:	0 - 10V AC, - 10V - + 10V DC
resolution	12 Bit (2.5mV)
amplifier
Frequency Range:	DC - 1 MHz
Connector:	Input-BNC, Output-4mm safety jack
Current:	16Aeff
Voltage:	50Veff / 75 VDC
distortion (DC-100kHz, load ≥4 ohms):	0.10%
general data
DUT control connector	9-pin Sub-D，RS232
connector to computer connection	USB
temperature range	0-40℃
Preheat time	15 minutes
Install	Rack 19 or desktop computer case
size	449×177×580mm
weight	About 40kg (gross weight 34kg)
gain	10+/-0.1%(+/-0.01%/℃)