ACS 500N6 single-phase AC voltage source-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

ACS 500N6 single-phase AC voltage source

Brand:

EM TEST

ACS 500N6 single-phase AC voltage source

Product Description
Main features
Technical parameters

- Commodity name: ACS 500N6 single-phase AC voltage source
- Commodity ID: 1064815712234262528
- 描述: The ACS 500N6 is a single-phase AC power source designed for harmonic and flicker testing.
- 品牌: EM TEST
　　The ACS 500N6 is a single-phase AC power source designed for harmonic and flicker testing. It meets the requirements of EN/IEC 61000-3-2, EN/IEC 61000-3-3 and JIS C 61000-3-2 standards, and can provide perfect and stable sinusoidal voltage signals required by the standards for testing. Regardless of the power supply frequency of the power supply, or even if the voltage is unstable, it does not affect it to complete the fully compatible harmonic and flicker analysis.
main feature:

　　Frequency range 10 Hz - 80 Hz

　　Output power up to 6,000 VA

　　Output voltage up to 300 V

　　Can withstand large energy surge current

　　Remote control by DPA 500N Harmonic and Flicker Analyzer via RS 232 interface

Standards compliant:

　　EN 61000-3-2

　　EN 61000-3-3

　　IEC 61000-3-2

　　IEC 61000-3-3

　　HE C 61000-3-2

advantage:

　　Sinusoidal voltages for harmonic and flicker measurements

　　Harmonics and flicker testing requires a clean AC source as required by the standard. The ACS 500N6 guarantees an output sinusoidal voltage with a distortion rate of less than 0.1%, regardless of the load condition. Voltage regulation is maintained at 0.1% even with load changes.

　　Regardless of the power supply conditions, ACS 500N6 can provide pure and stable sinusoidal voltage signal and frequency according to the standard requirements. Its power can reach 6,000 VA, according to the test requirements of EN / IEC 61000-3-2, EN / IEC 61000-3-3 and JIS C 61000-3-2 standards, it can test the equipment under test not exceeding 16 A .

　　The ACS 500N6 AC voltage source has overheating, overcurrent, overvoltage and undervoltage protection functions.

　　EM TEST DPA 500N series harmonic and flicker analyzer can realize remote control to ACS 500N6 through the test software dpa.control via RS232 interface.

output
voltage range	0 V - 300 V AC
Voltage resolution	0.025 % (12 bit)
Output frequency	10 Hz - 80 Hz 106 kPa(060 mbar)
frequency resolution	0.02 Hz
Frequency Accuracy, Stability	100 ppm
Output Power	6,000 VA
output connector	banana plug
Output current, 50Hz	Continuous: up to 24 A RMS value (up to 3 s): 47 A Repetitive peak: 200 A
Output current, 60Hz	Continuous: 24.9 A max RMS value (maximum 3 s): 47.9 A Repetitive peak: 200 A
Adjustment
voltage monitoring	Internal or external, 4-wire
Total Harmonic Distortion	less than 0.1 %
Output Voltage Stability	Better than 0.1 %
Output Voltage Accuracy	Better than 0.5 %
Maximum Voltage Compensation	5% f.s.
Protect	overcurrent protection Overheating protection overvoltage protection undervoltage protection
enter
supply voltage	3 × 400 V (3P，N，PE)
Input Current	32A (16A/27A , Neutral)
line frequency	45 Hz - 65 Hz
fuse	3 × 16 A (internal)
connector	Type CEE , 32 A
Environmental requirements
temperature	0°C - 35°C
Relative humidity	80 % without condensation
control
interface	RS 232 , 9-pin SubD
Exterior
size	19" / 6HU
weight	40 kg
volume	287 mm x 449 mm x 500 mm
option
DPA 500N	16 A Harmonic and Flicker Analyzer
MRAC 25	25 HU system cabinet with safety circuit
other models
ACS 500N3	3 kVA AC voltage source
Output Power	3,000 VA
Input voltage/current	230 V (L ，N，PE)，16 A
Output current, 50Hz	Continuous: 12.1 A max RMS value (maximum 3s): 21.8 A
Output current, 60Hz	Continuous: 12.5 A max RMS value (maximum 3s): 22 A