ENV432 4-Wire V-Network (9k-30M)-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

ENV432 4-Wire V-Network (9k-30M)

Brand:

ROHDE&SCHWARZ

Product Description
Main features
Technical parameters

- Commodity name: ENV432 4-Wire V-Network (9k-30M)
- Commodity ID: 1064763895022505984
- 品牌11: ROHDE&SCHWARZ
- 描述: R&S®The ENV432 four-wire V-shaped network meets the requirements of CISPR 16-1-2, EN 55016-1-2 and ANSI C63.4 for V-shaped networks. It has an analog impedance of (50 μH 5Ω) | | 50Ω in the frequency range of 9 kHz to 30 MHz.
- 品牌: ROHDE&SCHWARZ
The R&S®ENV432 four-wire V-network meets the requirements of CISPR 16-1-2, EN 55016-1-2 and ANSI C63.4 for V-networks and simulates impedance in the frequency range from 9 kHz to 30 MHz is (50 μH + 5 Ω) || 50 Ω. The R&S®ENV432 has a Schuko socket (EUT 1) and a CEE 32 A socket (EUT 2) for connection to the equipment under test (EUT).
main feature:
- Frequency range from 9 kHz to 30 MHz .
- Power handling capacity (up to 32 A), constant current .
- Analog impedance (50 μH + 5 Ω) || 50 Ω according to CISPR 16-1-2 .
- V-shaped network according to CISPR, EN, VDE, ANSI, FCC Part 15 and MIL - STD-461D, E and F.
- Calibrated to CISPR 16-1-2 and ANSI C63.4 .
Features and Benefits:
- Hollow core design and simulated hands
The R&S®ENV432 four-wire V-network is based on air-core inductors and includes a simulated hand.
- Built-in 10 dB attenuator
To ensure standard impedance (regardless of input attenuation of the measuring receiver), the R&S®ENV432 is equipped with a 10 dB attenuator.
- Built-in pulse limiter (can be turned off)
A built-in pulse limiter (can be switched off) protects the measurement receiver input.
- automatic temperature monitoring
The fan of the R&S®ENV432 switches on automatically when the internal temperature of the enclosure reaches approximately +50 °C. This protects the V-network under high constant current loads.
- Remote control of TTL levels (compatible with Rohde & Schwarz measuring receivers)
The TTL control input can be driven by a controller or a Rohde & Schwarz measurement receiver for remote control of phase selection in automated test systems.

Frequency Range		9 kHz to 30 MHz
Analog Impedance		50 μH + 5 Ω) \|\| 50 Ω
Error limits according to CISPR 16-1-2	amplitude and phase	±20% and ±11.5°
Decoupling fading between power supply and measuring receiver port according to CISPR 16 1 2	9 kHz to 50 kHz	>0 dB to >40 dB (increases linearly through the logarithm of frequency)
	50 kHz to 30 MHz	> 40 dB
Test path to EUT
Maximum allowable constant current	EUT 1	16 A
voltage	EUT 1	0 V to 240 V AC + 10%
DC voltage	EUT 1	0 V to 350 V DC + 10%
Maximum allowable constant current	EUT 2	32 A
Peak current (temporary)	EUT 2	50 A (2 minutes)
voltage	EUT 2	0 V to 240/415 V AC + 10%
DC voltage	EUT 2	0 V to 350 V DC + 10%
power frequency		0 Hz to 60 Hz + 5%
Test path to measurement receiver
Maximum permissible EUT radio frequency disturbance power		5W
Voltage division coefficient between EUT and measuring receiver port	Built-in attenuator, calibration data provided (using V-network)	10 dB – 0.5 dB/+ 2.0 dB
Response threshold of built-in pulse limiter	can be closed	140 dB (μV) (nominal)
Fan power supply and control logic
voltage	115V setting	100 V to 120 V AC ± 10%
	230V setting	220 V to 240 V AC ± 10%
power frequency		50 Hz to 60 Hz ± 5%
power consumption		100 VA (nominal)
Connector
Power supply and DC voltage output	Front panel, EUT 1	Schuko socket
Power supply and DC voltage output	Front panel, EUT 2	CEE socket (6h)
RF output	Front panel, to test receiver	N-type negative, 50 Ω
simulated hand	front panel	4 mm fitting, female, clamp with knurled edge
Power supply and DC voltage input	rear panel, power supply	CEE built-in connector (6h)
Supply voltage input (auxiliary voltage)	Rear panel, power supply for fans and remote control	Cryogenic Connectors with Mains Filters
remote control input	rear panel, remote control	25 contacts, D-Sub, female
safety ground wire	Front and rear panels	M8 threaded bolt
RF Reference Ground	both sides	Ground rod with seven M6 threads
general data
Operating temperature range		+5°C to +45°C
storage temperature range		–40°C to +70°C
total measurement	W × H × D	446 mm × 289 mm × 500 mm
weight		24 kg
Electrical Safety	Carefully follow the instructions in the manual	According to EN 61010-1
EMC		According to IEC/EN 61326-1
emission		Class B, meeting the living environment requirements
Anti-jamming		Comply with industrial environment requirements