-
-
-
-
EMC Test System For Civil Products
-
- Electrostatic Discharge Immunity
- Radiated, radio-frequency,electromagnetic field immunity
- Electrical Fast Transient Burst Immunity
- Surge immunity
- Immunity To Conducted Disturbance Induced by Radio Frequency Field
- Power Frequency Magnetic Field Immunity
- Voltage dips, short interruptions and voltage variations immunity
- Harmonics and interharmonics including mains signalling at AC power port, low frequency immunity
- Voltage Fluctuation Immunity Test
- Common mode disturbances in the frequency range 0 Hz to 150 kHz Immunity
- Ripple on DC input power port immunity
- Three-phase Voltage Unbalance Immunity Test
- Power Frequency Variation Immunity Test
- Oscillatory Wave Immunity Test
- Damped Oscillatory Magnetic Field Immunity Test
- Differential mode disturbances immunity test
- DC power input port voltage dip, short interruption and voltage variations test
-
Automotive Electronic EMC Test System
-
- Electrostatic Discharge Immunity
- Electrical Transient Conducted Immunity
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Anechoic Chamber Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Transverse Wave (TEM) Cell Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-large Current injection (BCI) method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Stripline Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-direct Injection Of Radio Frequency (RF) Power
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Magnetic Field Immunity Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Portable Transmitter Simulation Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Conduction Immunity Method For Extended Audio Range
- High Voltage Electrical Performance ISO 21498-2 Test System
- High Voltage Transient Conducted Immunity (ISO 7637-4)
-
-
- CE101(25Hz ~ 10kHz power line conduction emission)
- CE102(10kHz ~ 10MHz power line conduction emission)
- CE106(10kHz ~ 40GHz antenna port conducted emission)
- CE107 (Power Line Spike (Time Domain) Conducted Emission)
- RE101(25Hz ~ 100kHz magnetic field radiation emission)
- RE102(10kHz ~ 18GHz electric field radiation emission)
- RE103(10kHz ~ 40GHz antenna harmonic and spurious output radiated emission)
-
- CS101(25Hz ~ 150kHz power line conduction sensitivity)
- CS102(25Hz ~ 50kHz ground wire conduction sensitivity)
- CS103(15kHz ~ 10GHz Antenna Port Intermodulation Conducted Sensitivity)
- CS104(25Hz ~ 20GHz antenna port unwanted signal suppression conduction sensitivity)
- CS105(25Hz ~ 20GHz antenna port intermodulation conduction sensitivity)
- CS106 (Power Line Spike Signal Conduction Sensitivity)
- CS109(50Hz ~ 100kHz shell current conduction sensitivity)
- CS112 (Electrostatic Discharge Sensitivity)
- CS114(4kHz ~ 400MHz cable bundle injection conduction sensitivity)
- CS115 (Conduction sensitivity of cable bundle injection pulse excitation)
- CS116(10kHz to 100MHz Cable and Power Line Damped Sinusoidal Transient Conduction Sensitivity)
- RS101(25Hz ~ 100kHz magnetic field radiation sensitivity)
- RS103(10kHz ~ 40GHz electric field radiation sensitivity)
- RS105 (Transient Electromagnetic Field Radiated Susceptibility)
-
-
-
-
-
-
-
-
-
-
EMC Test System For Civil Products
-
- Electrostatic Discharge Immunity
- Radiated, radio-frequency,electromagnetic field immunity
- Electrical Fast Transient Burst Immunity
- Surge immunity
- Immunity To Conducted Disturbance Induced by Radio Frequency Field
- Power Frequency Magnetic Field Immunity
- Voltage dips, short interruptions and voltage variations immunity
- Harmonics and interharmonics including mains signalling at AC power port, low frequency immunity
- Voltage Fluctuation Immunity Test
- Common mode disturbances in the frequency range 0 Hz to 150 kHz Immunity
- Ripple on DC input power port immunity
- Three-phase Voltage Unbalance Immunity Test
- Power Frequency Variation Immunity Test
- Oscillatory Wave Immunity Test
- Damped Oscillatory Magnetic Field Immunity Test
- Differential mode disturbances immunity test
- DC power input port voltage dip, short interruption and voltage variations test
-
Automotive Electronic EMC Test System
-
- Electrostatic Discharge Immunity
- Electrical Transient Conducted Immunity
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Anechoic Chamber Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Transverse Wave (TEM) Cell Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-large Current injection (BCI) method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Stripline Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-direct Injection Of Radio Frequency (RF) Power
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Magnetic Field Immunity Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Portable Transmitter Simulation Method
- Immunity Test To Narrowband Radiated Electromagnetic Energy-Conduction Immunity Method For Extended Audio Range
- High Voltage Electrical Performance ISO 21498-2 Test System
- High Voltage Transient Conducted Immunity (ISO 7637-4)
-
-
- CE101(25Hz ~ 10kHz power line conduction emission)
- CE102(10kHz ~ 10MHz power line conduction emission)
- CE106(10kHz ~ 40GHz antenna port conducted emission)
- CE107 (Power Line Spike (Time Domain) Conducted Emission)
- RE101(25Hz ~ 100kHz magnetic field radiation emission)
- RE102(10kHz ~ 18GHz electric field radiation emission)
- RE103(10kHz ~ 40GHz antenna harmonic and spurious output radiated emission)
-
- CS101(25Hz ~ 150kHz power line conduction sensitivity)
- CS102(25Hz ~ 50kHz ground wire conduction sensitivity)
- CS103(15kHz ~ 10GHz Antenna Port Intermodulation Conducted Sensitivity)
- CS104(25Hz ~ 20GHz antenna port unwanted signal suppression conduction sensitivity)
- CS105(25Hz ~ 20GHz antenna port intermodulation conduction sensitivity)
- CS106 (Power Line Spike Signal Conduction Sensitivity)
- CS109(50Hz ~ 100kHz shell current conduction sensitivity)
- CS112 (Electrostatic Discharge Sensitivity)
- CS114(4kHz ~ 400MHz cable bundle injection conduction sensitivity)
- CS115 (Conduction sensitivity of cable bundle injection pulse excitation)
- CS116(10kHz to 100MHz Cable and Power Line Damped Sinusoidal Transient Conduction Sensitivity)
- RS101(25Hz ~ 100kHz magnetic field radiation sensitivity)
- RS103(10kHz ~ 40GHz electric field radiation sensitivity)
- RS105 (Transient Electromagnetic Field Radiated Susceptibility)
-
-
-
-
-
-
Product
EMC Testing Solution Provider
FSH handheld spectrum analyzer (9k-20G)
Brand:
ROHDE&SCHWARZ
- Product Description
- Main features
- Technical parameters
-
- Commodity name: FSH handheld spectrum analyzer (9k-20G)
- Commodity ID: 1064764764472365056
- 品牌11: ROHDE&SCHWARZ
- 描述: R&S®FSH handheld spectrum analyzer combines the functions of spectrum analyzer, network analyzer, cable and antenna analyzer, interference capture analyzer and power meter.
- 品牌: ROHDE&SCHWARZ
The R&S®FSH handheld spectrum analyzer combines the functions of a spectrum analyzer, network analyzer, cable and antenna analyzer, interference hunting analyzer and power meter in one. This versatile analyzer enables simple and efficient on-site measurements. The sturdy design and built-in handle make it ideal for outdoor tasks.
-
main feature:
- 9 kHz to 20 GHz.
- Excellent sensitivity, < –161 dBm (1 Hz) with preamplifier .
- All-in-one analyzer: spectrum analyzer, network analyzer and CAT.
- Internal Tracking Source, VSWR Bridge, Biaser.
- Features a rugged, water-resistant housing for field use.
-
spectrum analysis
R&S®FSH4
R&S®FSH8
R&S®FSH13
R&S®FSH20
Frequency Range
Model 04/14/08/18/13/23/20/30
9 kHz to 3.6 GHz
9 kHz to 8 GHz
9 kHz to 13.6 GHz
9 kHz to 20 GHz
Model 24/28
100 kHz to 3.6 GHz
100 kHz to 8 GHz
–
–
resolution bandwidth
1 Hz to 3 MHz
Displays the average noise level
No preamplifier, RBW = 1 Hz (normalized)
9 kHz to 100 kHz
(models 04/14/08/18 only
)< –108 dBm, –118 dBm typical
< –96 dBm, –106 dBm typical
100 kHz-1 MHz
< –115 dBm, –125 dBm typical
1 MHz-10 MHz
< –136 dBm, –144 dBm typical
10 MHz-2 GHz
< –141 dBm, –146 dBm typical
2 GHz-3.6 GHz
< –138 dBm, –143 dBm typical
3.6 GHz-5 GHz
–
< –142 dBm, –146 dBm typical
5 GHz-6.5 GHz
–
< –140 dBm, –144 dBm typical
6.5 GHz-13.6 GHz
–
< –136 dBm, –141 dBm typical
13.6 GHz-18 GHz
–
–
–
< 134 dBm, –139 dBm typical
18 GHz-20 GHz
–
–
–
< 130 dBm, –135 dBm typical
With preamplifier, RBW = 1 Hz (normalized)
100 kHz-1 MHz
< –133 dBm, –143 dBm typical
–
1 MHz-10 MHz
< –157 dBm, –161 dBm typical
< –155 dBm, –160 dBm typical
10 MHz-2 GHz
< –161 dBm, –165 dBm typical
–
2 GHz-3.6 GHz
< –159 dBm, –163 dBm typical
–
3.6 GHz-5 GHz
–
< –155 dBm, –159 dBm typical
5 GHz-6.5 GHz
–
< –151 dBm, –155 dBm typical
6.5 GHz-8 GHz
–
< –147 dBm, –150 dBm typical
8 GHz-13.6 GHz
–
–
<–158 dBm, –162dBm typical
13.6 GHz-18 GHz
–
–
<–155 dBm, –160dBm typical
18 GHz-20 GHz
–
–
–
< 150 dBm, –155 dBm typical
Third Order Cutoff Point (IP3)
300 MHz-3.6 GHz
> +10 dBm, +15 dBm typical
3.6 GHz-20 GHz
–
> +3 dBm, +10 dBm typical
phase noise
500 MHz frequency
30 kHz carrier offset
< –95 dBc (1 Hz), –105 dBc (1 Hz) typical
100 kHz carrier offset
< –100 dBc (1 Hz), –110 dBc (1 Hz) typical
1 MHz carrier offset
< –120 dBc (1 Hz), –127 dBc (1 Hz) typical
Geophone
–
Sample value, maximum peak value, minimum peak value, automatic peak value, RMS value
Level measurement uncertainty
10 MHz < f ≤ 3.6 GHz
<1 dB, 0.5 dB typical
3.6 MHz < f ≤ 20 GHz
–
<1.5 dB, 1 dB typical
monitor
6.5" color LCD, VGA resolution
Battery life (no tracking source)
R&S®HA-Z204,4.5 Ah
up to 3 hours
R&S®HA-Z206,6.75 Ah
up to 4.5 hours
Dimensions (W × H × D)
194 mm × 300 mm × 69 mm (144 mm)1)
7.6 in × 11.8 in × 2.7 in (5.7 in)weight
3 kg (6.6 lb)