Current monitoring clamp MP-50 10 kHz – 400MHz-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

Current monitoring clamp MP-50 10 kHz – 400MHz

Brand:

FRANKONIA

Current monitoring clamp MP-50 10 kHz – 400MHz

Product Description
Main features
Technical parameters

- Commodity name: Current monitoring clamp MP-50 10 kHz – 400MHz
- Commodity ID: 1064816966851252224
- 品牌11: FRANKONIA
- 描述: Current monitoring probes are used to measure RF current. Current measurement is carried through the current-carrying conductor probe in the "Sensor" window, a voltage probe that measures the RF output.
- 品牌: FRANKONIA
　　Current monitoring probes are used to measure RF current. Current measurement is carried through the current-carrying conductor probe in the "Sensor" window, a voltage probe that measures the RF output. The calibrated probe is used to measure the voltage, which is converted into a measurement current. Current measurements can be made over the frequency range indicated by the curve where each probe is equipped with a transmission impedance. During the measurement, there is no load on the circuit and the current detector operates normally.

　　The MP-50 can be used as an injection clamp when the common-mode impedance requirements cannot be met by the requirements given in Chapter 7.4 of IEC/EN 61000-4-6 "Conducted disturbance immunity, RF field sensing". The MP-50 can also be used as a current monitor for ISO11452-4, RTCA/DO-160 Part 20, MIL-STD-461, and various automotive standard High Current Injection (BCI).

　　The MP-50 current monitoring probe measures single conductor or wire harness RF common-mode current (asymmetric current). Current saturation effects may occur depending on the low frequency, so the low-frequency characteristics are shifted to the high frequency. The current synthesis marked in the above chart is important, so a complete wire bundle is much more important than a single wire. To estimate the factors of the saturation effect sensor, different low-frequency currents are given.

parameter	illustrate
Frequency range	10kHz–400MHz
Insertion impedance	<2.5Ohm
Cable diameter	<46mm
Output interface	BNC
Maximum signal current (10kHz–400MHz)	1A
Physical characteristics
size	Outer diameter: 115mm Thickness 30mm Length 136mm
weight	0,55kg