High voltage artificial power supply network shielding cover HVSE 8600-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

High voltage artificial power supply network shielding cover HVSE 8600

Brand:

SCHWARZBECK

High voltage artificial power supply network shielding cover HVSE 8600

Product Description
Main features
Technical parameters

- Commodity name: High voltage artificial power supply network shielding cover HVSE 8600
- Commodity ID: 1064820027464241152
- 品牌11: SCHWARZBECK
- 描述: The HVSE 8600 shielding enclosure is designed to meet the high-voltage LISN test of electric vehicles and hybrid vehicles. Its significance is to enhance the shielding performance of high-voltage LISN.
- 品牌: SCHWARZBECK
　　The HVSE 8600 shielding enclosure is designed to meet the high-voltage LISN test of electric vehicles and hybrid vehicles. Its significance is to enhance the shielding performance of high-voltage LISN. The aluminum enclosure has three quick locking devices that allow quick opening or closing of the shielding cover. Both the front and rear panels are designed with quick-install shielded cables.

Front panel mount interface	4 x N female RF HV+, RF HV-, 2 x AUX (e.g. for CurrentClamp)
Rear panel mount interface	HV+, HV-
material	aluminum
weight	24kg
Internal dimensions	480 x 635 x 250 mm
Dimensions	505 x 650 x 290 mm
Shielding performance	typ. > 100 dB
Applicable Model	NNHV8123, NNHV 8123-200, NNHV 8123-400

　　Interface Description:

　　There are four RF connectors on the front panel, two are used to measure the interference voltage from HV+ and UV-, and the third and fourth AUX ports can be used to connect current probes.

　　The shielding shell is equipped with a conductive gasket to ensure good shielding performance. Usually, the shielding layer of the shielded cable and the shielding cover are in good contact to form a shielding. The quick connector can ensure the reliable and fast installation of the test cable.

　　There are four aluminum ground mounting terminals inside the shield to ensure that the LISN can be reliably grounded.

　　Order information:

Shield	HVSE 8600
A pair of flanges (100A feedthrough)	Opt. 8600-100 Cable cross-sectional area: 6-16 mm ² High voltage cable diameter (inside the shield): 5-9 mm HV cable wrench specification: 17 mm
A pair of flanges (200A feedthrough)	Opt. 8600-200 Cable cross-sectional area: 16-35 ^mm2 High voltage cable diameter (inside the shield): 9-13 mm HV cable wrench specification: 22 mm
A pair of flanges (400A feedthrough)	Opt. 8600-400 Cable cross-sectional area: 35-95 ^mm2 High voltage cable diameter (inside the shield): 13-20 mm HV cable wrench specification: 34 mm
Pair of blanco flanges	Opt. 8600-white A pair of flanges with only 4 through holes on the test side (2xAUX, RF-HV+ and RFHV-) There are no outlets or feedthroughs on the supply side. HV+ and HV- must be installed by the user.

　　Ground bar installation:

　　To ensure better grounding, the user is allowed to install grounding strips. As shown in the picture, the T10 screw in the picture can be removed and then installed.