PT4 set BURST transformer-Century Wisdom (Suzhou) Testing Technology Co., Ltd

English

Home page

Product

EMC Testing Solution Provider

PT4 set BURST transformer

Brand:

LANGER

Product Description
Main features
Technical parameters

Commodity name: PT4 set BURST transformer
Commodity ID: 1064490806988656640
品牌11: LANGER
描述: PT4 is used to efficiently analyze the immunity of components and equipment. The PT4 BURST transformer converts the pulses of the EFT/Burst generator into potential-free burst pulses. These bursts are fed segment by segment to the DUT
品牌: LANGER

　　PT4 is used to efficiently analyze the immunity of components and equipment. The PT4 BURST transformer converts the pulses of the EFT/Burst generator into potential-free burst pulses. These bursts are fed segment by segment to the DUT, thus being able to define sensitive areas on the DUT. The PT4 series consists of a magnetic field source and an electric field source, both fed by an EFT/Burst burst generator. The surface of the object under test can be sampled by means of the field lines emitted by the field source probe, so that sensitive points can be precisely located.

Include:

　　PT4, BURST transformer

　　BS 04DB-h, Magnetic field sources

　　ES 05D-h, electric field source

　　HV SHV-SMB 1 m

　　PT4 acc

　　PT4 case

　　PT4 m, PT4 Series Operation Guide

PT4

application	describe	design
	The PT4 pulse transformer galvanically isolates the EFT/Burst pulse generator output pulses from the generator according to IEC61000-4-4. Its symmetrical output signal can be coupled to the object under test through different paths. After testing, it is possible to determine the fault corresponding to a single printed circuit board or connector on the DUT.
	The BS 04DB-h type magnetic field source produces a magnetic field with a diameter of approximately 3 mm. The surface of the printed circuit board can be sampled by means of the magnetic field emitted from its front side, which eliminates magnetic weak points in the circuit layout and assembly areas. It is also possible to locate critical conductor segments, critical components and the connections of these components. Probe size: 1 mm - 3 mm
	The ES 05D-h electric field source has a narrow decoupling electrode inside the probe. Therefore, it is suitable for applying electric fields to wires, small component machine connectors, cables and individual components. It can also be used to measure individual connectors or cores of flat ribbon cables.